Question about Lands Phones

1 Answer

Meridian M7208 Hold sounds

I have a Meridian M7208 and I can't seem to get the beep that the person on the other end of the line hears when on hold. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lands Phones Master
  • 2,460 Answers

And to think, most people want that tone gone!

It comes from system programming. When the phones were installed, the initial program was set up for no noise, tones, or Music. It's changeable from at least the installer's area, and it may be accessable from anywhere because you may be talking 308/616/824 system which has no password levels for that programming.

Check for a system guide to programming. If you can't find one, check for a system model number. IF YOU HAVE A CUTE CARD STICKING OUT OF THE TOP, DO NOT REMOVE IT. Your system may be old enough that it will disable the system. There will be warning signs ot the card anyway, but believe them, please.

Carl




































































Carl

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My M7310 won't forward a call to the next open line but gives a busy signal


Hard to answer because your problem description does not match the part.
Nortel Meridian M7208 Corded Phone is a digital phone which works off a phone system.Also note that the carrier controls the rollover, not the phone or its system.

Once you have more/proper details maybe you can be helped.

Dec 14, 2012 | Nortel Meridian M7208 Corded Phone

2 Answers

How to program speed dial on T7208 telephone?


Programming
memory buttons
External autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press a memory button.
4. Dial the external number.
5. Press Hold to store the number.
6. Label your new button.

Internal autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 2
3. Press a memory button.
4. Dial the internal number.
5. Label your new button.

Features
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 3
3. Press a memory button.
4. Press Feature and the feature code.
5. Label your new button.

Erasing memory buttons
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press the memory button you want to erase.
4. Press Hold to erase the button.

Feb 13, 2010 | Nortel Meridian M7208 Corded Phone

1 Answer

Meridian M7208. I managed to reset the default


Press feature *3, press the button you want to program back to speed dial, and press feature 0.

Oct 05, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

No dial tone


It sounds like you have the wires hooked up wrong. Check both ends of the wire.

Jun 01, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Meridian M7208 Phone-Only 2 lines are working


Sounds like it might be a telco problem. Do lines 3 ,4 work on the other phones?
Switch lines 1 and 3 to see if the problem changes.

Apr 22, 2009 | Nortel Meridian M7208 Corded Phone

2 Answers

MERIDIAN NORSTAR SYSTEM CURRENTLY HAS CD IN FOR HOLD MUSIC, WANT TO STOP THAT AND GO BACK TO BEEP BEEP WHEN ON HOLD.


Go into the programming of Norstar and system programming and cahge the back ground music to Beep.

Apr 21, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Doesnt ring


My BT Meridian compact does not ring after it powered down in a thunder storm. The lines flash and can be answered as normal just no ringing sound

Mar 14, 2009 | NorStar M7208 Corded Phone

1 Answer

Unable to use conference button


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]
  • Establish a conference call between yourself and two other parties.
    1. Make or answer the first call.
    2. Put the first call on hold.
    3. Make or answer the second call.
    4. After the second call is connected, press [Feature] [3].
    5. Press the line or intercom button of the first held call.
    6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Mar 11, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Nortel neworks voice


If your system is a Nortel Callpilot just log into your mailbox, then press 8, the first option "Record your name in the company directory" is what I think you're looking for.

Aug 05, 2008 | Nortel Meridian M7208 Corded Phone

2 Answers

RCA 4 line phone


Hi Richman,

If you have more than one phone line which I assume that you do -if one party has not completely hung up the handset after putting someone on hold when you pick it up on your end you will hear that beeping noise that you are talking about. Have them pick back up the line while you are on it and replace the handset again on thier phone to disconnect completely.

I hope this helps (trial and error)
Thanks

Oct 04, 2007 | GE 29488GE2 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...