General Electric profile microwave model PNM216SK1SS

Ck here....

https://www.appliancepartspros.com/repair-help/general-electric-microwave-pvm1790sr1ss-repair/pvm1790sr1ss-wont-start.html

But before throwing parts at it give them a call #877#.

I'm NOT affilated with them.

Best to you.

You can find information on the GE microwave F3 error code here
https://appliancerepairinfo.com/ge-general-electric-microwave-error-codes/

:) Luckily, these GE touch screen models can now be affordably repaired.

Full official details on the fix are at http://www.microwavecontrol.com/jvm2070.htm.

Let me know if you have other questions.

William Edward Miller
[email protected]
August 2016

NOTE: This information applies to ALL of the General Electric touch-screen models below:

CVM2072 SERIES

CVM2072SM1SS
CVM2072SM2SS
CVM2072SM3SS
CVM2072SM4SS

JVM2070 SERIES

JVM2070BH
JVM2070CH
JVM2070SH
JVM2070SK
JVM2070WH

JVM2070BH001
JVM2070BH002
JVM2070BH01
JVM2070BH02
JVM2070CH001
JVM2070CH002
JVM2070CH01
JVM2070CH02
JVM2070SH001
JVM2070SH002
JVM2070SH01
JVM2070SH02
JVM2070SK001
JVM2070SK002
JVM2070SK01
JVM2070SK02
JVM2070WH001
JVM2070WH002
JVM2070WH01
JVM2070WH02
JVM2071BH01
JVM2071BH001
JVM2071CH01
JVM2071CH001
JVM2071SH01
JVM2071SH001
JVM2071WH01
JVM2071WH001

PVM2070 SERIES

PVM2070DMBB
PVM2070DMCC
PVM2070DMWW

PVM2070DM1BB
PVM2070DM1CC
PVM2070DM1WW
PVM2070DM2BB
PVM2070DM2CC
PVM2070DM2WW
PVM2070DM3BB
PVM2070DM3CC
PVM2070DM3WW
PVM2070DM4BB
PVM2070DM4CC
PVM2070DM4WW
PVM2070SM1SS
PVM2070SM2SS
PVM2070SM3SS
PVM2070SM4SS

These models utilize one or more of the following part numbers:

WB07X10731
WB07X10732
WB07X10733
WB07X10972
WB07X10973
WB07X10974
WB07X11113
WB07X11131
WB07X11139
WB07X11143
WB07X11192
WB07X11194
WB07X11195
WB07X11196
WB07X11302
WB07X11303
WB07X11304
WB07X11305
WB07X11306

###

It sounds like you may have a shorted cook relay on the control circuit board which can be repaired simply and inexpensively.

A YouTube video showing how to remove a typical over the range control panel assembly in under 5 minutes, is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

The keypad control board is the problem, the only solution is replace it.

Unplug the unit for 1 minute to clear the ECU.
re-plug, and re-try.

Thanks

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

///..

the magnatron has blown they are very expensive to repair i suggest you buy a new microwave

]hope this helps

More than sure, the door micro switches do not work properly, they should be carefully checked.