Question about Philips Televison & Video

3 Answers

Need info on component 3071 on power supply board - burned up.

Component 3071 on power supply board is burned up. Can't tell what it should be. Can anyone supply this information?
Magnavox 37MF231D/37 LCD

Power Supply Board
3138 103 6294.2

Regards

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Its been a while since i worked on that power board. But I believe you are refering to the orange diode that runs into the single connector for the video board next to the power supply. I replaced mine with a 1n914 diode after replacing the 2200uf lytic cap and the tv fired right up.
Need info on component 3071 on power supply board  - ef1e2bf.jpg

Posted on Sep 11, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Does any body know the value of the three caps....2080,2081,2082

Posted on Jul 30, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

Your best bet is to replace the power board. You will have better luck on replacing to board level vs. component level.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I identify a burnt component, I've dissasembled a monitor which was not working (stopped working with a popping noise) I can see a couple of burnt components on the power supply board.


YOULL NOTICE WHEN YOU SEE A BLACKISH TAN COLOR BURN MARK ON THE COMPONENT OR IT COULD BEVERY WARM WHEN YOU TOUCH IT AND NOT HAVE A BURN MARK ON IT AT ALL

Jan 09, 2017 | Televison & Video

2 Answers

Bought an LG flat screen 2 yrs. Ago smells like burning plastic. Help!!


Burning smell is not good. Get it to a repairman, Too little info, could be anything cheap to major

Mar 22, 2015 | LG Televison & Video

1 Answer

Xtronie x20qa12074802 colour television burns fuses when i power it


that was mean has bad major component either in the power supply board or in the main board.check first shorted bridge type diode and regulator ic and FET transistor in the power supply board if getting shorted.

Sep 07, 2012 | Televison & Video

1 Answer

I HAVE A PHILIPS TV THE POWER SUPPLY WAS BURNED ONE PART I CANNOT READ WHAT COMPONENT WAS DAMAGED, I NEED SCHEMATIC DIAGRAM SO THAT I DETERMINE THE SEMICONDUCTOR COMPONENT THE IS 25PT463A/71R THANKS


Try this site .They should be able to get it. www.service manual.net.As info be sure to check all your caps for swelling as it is a common problem.I have had to replace 5 in my samsung 50" screen.

Apr 27, 2011 | Philips Televison & Video

1 Answer

Turn the computer the only thing that light up is the charging light batt..


Most cases there is no need to replace the motherboard. Try to find out what component has burned and replace it. If the main power supply to the inverter board had shorted, then, the supply giving FET may be burned. You may see as it burned. If the inverter activating device ( a small FET) had burned, you can also see it. In some systems there is a fuse for the inverter supply in inverter board as well as on the motherboard. You can also identify it.Make a reply if this is helpful.

Apr 19, 2010 | HP Pavilion dv1000 Notebook

2 Answers

Component failure


what model you have and what brand?

Jun 12, 2009 | Televison & Video

1 Answer

Problem identifying P4G533-LA motherboard electronic component


Its a diode but where can u find it ? Before replacing this check your powersupply. The parts number will be the same as beside.
Try carefully. You have a small hope.

Feb 14, 2009 | Computers & Internet

1 Answer

Lcd dv3250 not working


the fact that you have on screen display tells me that you are on a blank digital channel, or input with no signal. check to see if this is so on all of your inputs DVD, VCR, Cable, Sat box... if there is no signal still, replace the scaler board.
here's the four basic components to a LCD tv.
1. panel. there is on board electronic inside not componet level repaired.
2. power supply. this feeds power to the unit 5V, 24V, and 15V. the 5V is the standby voltage while the 24V supply the inverters.
3. the inverters. this is a DC to DC inverer used to light the lamp. these and not component level repaired.
4. the scaler board. this is the board that runs the show. it sends the signal to the panel to paint the picture.also sends commands to the power supply to turn on the inverters. this board is definatly not component level repaired. most all of the boards can not be repaired at the component level, power supply may be the only one, but not all power supplies can be.
there is one other part to the set that does have failures and that is the cable connecting the panel to the scaler. this is the LVDS cable. sometimes just reseting the cable can solve many problems.
so based on this info your panel is working because you have onscreen display. your iverters are working because without the lamps you would not see the on screen. your power supply is working because you have inverters working. and the only thing left is the scaler this provides the on screen so we know that it is at least partly working.

Jan 19, 2008 | Televison & Video

1 Answer

P4004 - Blown Components


if burned components are on output stage or amplifier section on board..Then look at the oposite side of amp..Both amplifier section should be a mirror image oof componentc from other..that way you can know the values of parts.If they are on power supply section ..Then you might need manual if available..

Dec 23, 2007 | Rockford Fosgate Punch P4004 Car Audio...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

789 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74245 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...