Question about NorStar M7208 Corded Phone

1 Answer

How do you set up caller ID on a Norstar M7208 phone with 4 lines?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

There are a few other things you need before it will just work on your phones. You need to get Caller-Id activated by your carrier on each of the 4 lines. You also need to make sure your system has a Trunk card capable of Caller-Id. The card in your systems should be labeled CID.

After this you still need to program the lines for Caller-Id in the configuration section of programming.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't one phone in my norstar meridian m7310 phones is not displaying caller id


Either COPY the config settings from a set where it works to those that don't, or on the sets that do not:

F**CONFIG, Terminals&Sets, (enter ext #), ... Telco Features, 1st Display Name: change between Name, Number, or Line.
And remember that some callers (esp Cellphones) do not provide Name info, so if the incoming calls at that extension are mostly from the same #s, it might be normal.

Aug 11, 2014 | NorStar Meridian M7310 Phone

1 Answer

CANT GET CALLER ID TO WORK ON NORSTAR M7310 PHONE IS IT CAPABLE


This feature requires a class trunk card in the phone system to pass Caller ID.

Jan 17, 2013 | NorStar M7310 Corded Phone

1 Answer

Nortel Norstar M7208 always reads "Calls For You". What can i do to clear display?


This is Caller ID log

FEATURE 812 View Call Log
FEATURE 813 Manual Call Log
FEATURE 815 Deletes Call Log Items


To have no log see your office administrator or call your local tech to De-program your phone from the system log.

Nov 28, 2012 | NorStar M7208 Corded Phone

1 Answer

Caller ID not working on Norstar terminal using line dedicated to fax and phone


You must have latest software to have Caller ID
You must have a Caller ID line card
Caller ID must be programmed on the phone to allow it
Caller ID signal from carrier is sent between 1st and 2nd call

FYI on the fax: Analog ports (ATA's) on the Norstar system do not show Caller ID, instead you would need to use a line share device that supports caller id such as the STICK.

Oct 25, 2012 | NorStar M7310 Corded Phone

1 Answer

Can you have caller id on copper DID's with nortel?


short answer is no. You would need a T-1, PRI with a D Channel

Jul 13, 2010 | NorStar M7208 Corded Phone

1 Answer

StarTalk Flash is 1.7.00 + caller ID


The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

Mar 24, 2010 | NorStar M7310 Corded Phone

1 Answer

Do the Norstar M7208 and Aastra 9120 phones compatible on the same PBX? I have a M7208 that works fine on current PBX, but new Aastra 9120 doesn't work. Should they both operate on the same PBX?


No, the M7208 is a propriatary set which requires the PBX to function, whereas the aastra phone is a stand alone set which requires a standard telephone line and a power source.

Dec 23, 2009 | NorStar M7208 Corded Phone

1 Answer

Caller id only displays after i pick up the line


it is a progrsamming issue that can be fixed where are yuou located?

you can call me at 3107016774

Sep 18, 2008 | NorStar Meridian M7310 Phone

3 Answers

Norstar M7208 display screen garbled


Increase the contrast of display of ur phone it might fix the problem

May 13, 2008 | NorStar M7208 Corded Phone

1 Answer

Caller id


first u.............

Apr 01, 2008 | NorStar M7208 Corded Phone

Not finding what you are looking for?
NorStar M7208 Corded Phone Logo

Related Topics:

1,951 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...