Question about Wharfedale Televison & Video

1 Answer

I have just purchased a Wharfedale DVDR160HDF box . I have installed it but keep getting and error code E3750W. What is this and can I correct it .

Posted by on

  • bruceevans3 Jul 23, 2009

    Thanks for the help , seems to have sorted it out .

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

Hello there, that error indicates a loss of tuner signal. If you are certain you have your cable line plugged in correctly and securely then try unplugging the system and letting it sit for 90 seconds at least, then go ahead and plug it back in.

If the error still persists then the tuner is either malfunctioning or your signal is having problems. Either way you will want to check with your TV provider.

Oh yes, make sure your signal is digital, I'm pretty sure this box does not work at all with an analog signal (such as an antenna).

Thanks

Tim

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wharfedale dv832b software upgrade? I bought this a ouple of years ago and sinc then it has never updated itself eve though it is enabled. I have waited and nothing haseer happened. A couple of weeks ago I...


Hello
Just get into the Wharfedale site and upgrade it with latest software available, that suit to your DVD-M3. It will take some time, say about an Hour to complete the donload and installation. Don't stop as download stops, the softwre must be installed, and it will happen only after the full download. After sucessfull download, the set will propt you that has done sucessfully. Till then, never switch off the net connection, or do nothing at set end. If installation is not successful, the fault you describe here will occur. OK.

Sep 25, 2011 | Wharfedale DVD-M3 DVD Player

1 Answer

I keep getting no signal and an error code e-1500


HI. The signal board has failed. This is an integrate part of the internal main assembly that regulates the input that the many decoder receives, via input cables(hdmi,rgb,s-video),ect... Due to the integrated status of the main board, The entire assembly will need ot be replaced. Contact your local retail depot for instructions on how to start a repair ticket for your unit. the only option here is to send it in for this repair. The actual parts needed are not available for consumer purchase.

Oct 03, 2009 | Wharfedale DVD-M3 DVD Player

1 Answer

I have a wharfedale M2163 TV and need the 3 digit code to unlock


0312,0547 & 0065. hope these will work for you wharfedale appear to be all 4 digits in 2163 model

Please rate our help to keep the FREE service online ++++ Thanks for using Fixya


Sep 02, 2009 | Daewoo DTQ-13P2FC 13" TV

1 Answer

In car usb conection wont work


It appears this stereo is compatible with a limited number of mp3 players. I had the same problem with my Ford Edge Sync option. See if you can get a list of compatible players from the manufacturer/ dealer. If not, try different mp3 players until you find one that works reliably and purchase one.

Dec 30, 2008 | Wharfedale DVD-M3 DVD Player

2 Answers

Wharfedale TV power problems


got a 32 inch wharfedale tv from argos also and it seems to boot up and then shut down and just loops, if i keep unplugging it i can sometimes get it on but with a high pitch wailing, only 15 months old, gutted!

Jun 16, 2008 | Televison & Video

2 Answers

Wharfedale dvdrhd400 problems


Change the Scart setting (in the setup menu) from the default setting (RGB) to the other available setting (CVSC?).
I have a problem with my box restting the clock on a random basis, making it impossible to set a timer to record anything - let us know if you get the same problem via this site!

Jan 03, 2008 | Wharfedale DVD-M3 DVD Player

1 Answer

Wharfedale MP3 2GB


hi
i've just purchased the whafedale mp3 and when i go to transfer files over it keeps coming up as unexpected error 0x80070052 try again but it still comes up the same.

Dec 26, 2007 | Audio Players & Recorders

3 Answers

Error code


I had the same problem - turn off at the wall and on again fixed it.

Dec 07, 2007 | Wharfedale DVD-M3 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale Televison & Video Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Jonathon summesfield

Level 2 Expert

285 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Wharfedale Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...