ARE MARINES APPLIYING TO WORK THE WHITE HOUSE INSTEAD OF BEING ASSIGNED

Guessing the wheel bearing it is fairly common

Try this ....when you scan via iphone for your wifi instead of inputting password...go to the right chevron ....click forget this network.....then rescan wifi....then rein put password....it should accept.if not password for router has been changed....this means you need to go to routers ip (google it) at wwww.mywifirouterlogin.net. And input the user:pass assigned for that make model.then you will see the routers assigned password as it may not be the network key that is on the back or bottom of router housing.

If you want to check the connection from desktop ten follow this.Click on start menu.In run, type cmd and press ENTER.Now in dos mode type ping>space>ip address of machine which you want to check. press enter.If it shows TTL=32 or ttl=64 then it means OK.Your machine is connected with desktop.
Now if you want to put your machine on network and want to assign IP to machine then do these steps1-Connect the network cable to machine.2-Assign an IP to machine.3-To assign the IP, Simply press "Utility/counter" button.4-press "check details" button on LCD panel.5-Now press Admin management.6-Enter password. 123456787-select ADMIN 28-select Network settings.9-Select DHCP.set it to manual instead of auto obtain.10-Now assign the IP in IP address option and after entering correct free ip restart the machine.

You must have hooked the speaker output from the VHF to the nmea output of the GP320 instead of the NMEA!

Do you still have the case and if so is it for sale. Please email back. [email protected]

3-pair version of (red/green, black/yellow, white/blue). But the first two pairs are not twisted
So it becomes green/red, yellow/black, & white-black/blue. G1/ R2 /3Y /4B /5*Blk/6Blue (this is what you physically see on the other RJ11 connections since this is a data connection and not a phone connection it should be a straight-through instead of cross-over connection.
These RJ 11 PINOUT assignments may be incorrect because they apply to a color camera instead of B/W

1 SPEAKER (+)
2 VIDEO_OUT
3 GND
4 SPEAKER (-)
5 AUDIO_OUT/ALARM_OUT
6 12V DC
Back of Camera
Clip up, contacts down
123456
RJ11-e starts off like a RJ45 Stranded Patch Cable.
The color code used in stranded patch cables is different from solid-conductor cables. For NorTel Digital Patch Cable (DPC), the coding is; Pair 1: Green & RedPair 2: Yellow & BlackPair 3: Blue & *Orange White\Black
*In Pair 3 the color coding is Blue & Black instead of Blue & Orange and the pair is twisted so that the Blue wire is the 6th pin instead of the 5th pin.

Ac house wiring is like this Hot - Nuetral (the two prongs) and ground (Usually a green wire) white and black are Hot and Nuetral . . . perhaps google AC house wiring, along with common wire colors and their assignments

whenever i am appliying any themes the message is themes currepted
plz solve this problem online now