Try to swith on my lenoovo labtop is loading by not swicthing on

The swith should just pop out of the dash. Try gently prising with a bit of sideways pressure with a small or jewlers screwdriver. When out just unplug & replace

You need to replace power switch if they did not contact.What swicth is the deffect,the main swicth or the tack swicth the second power?

Welcome to Fixya

You can download the veriface software at lenovo website. Just click the veriface link then click this file IN3STW15WW5.exe. Just agree to the license and agreement then hit run.

Please let me know if you have further questions.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

The FRIGIDAIRE washing machine as in all washers have what is called a WATER LEVEL SWITH. This switch is on the top and this is where you select small,medium or large water levels. This water level switch has a clear hose from the top of swith to the side of the out tub. Please check the following:
1- check that the hose is hooked up on both sides and inspect it that it does not have any holes.
2- There could be a small sock or something foreign in between the inner and out drum therefore clogging up this hole.
3- Replace the water-level swith.

First check +12v to seat switch going in and activate swith to get +12 out. Start there. Maybe more wires were pulled. Might have to get a mc manual and follow wiring in circuit - Sorry, don' kill him, it happens.

The brake light actual sitch is down by pedal, but if you dont have any brake lights at all it is most likely the relay, this is located behind ashtray and fuse box cover, it is big red relay,marked with letter A. change it.

Is it possible to download the drivers for Netgear wireless router & Voice adapter WGR613VAL

your load is too high. try reducing it

If the image was taken with a camera using a high number of megapixels, the image file may be too large for the phone to handle. If you have any photo editing software, try resizing the photo.

when i try to switch the phone on it comes up memory full.. phone start up promblem on screen.the phone wont switch on. i want to save all my info on the phne or access it. can u help plse..
Answer:- If It doesn't swithes on then there is no way to save any info. U must erase its all data by pressing
[calling key(green key)3 * and switch it on u must press all 4 of them at once and remember ur battery must be charged enough to run it atleast 20 minutes and it will show formatting and after a few minutes it will start and ask for date & time