Question about Kenmore HE2 Plus Front Load Washer

1 Answer

HE2 Plus blinks F-11

HE2 Plus is not finishing a wash cycle.It gets through most of the normal wash cycle and then it blinks F-11.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Look for the technical brochure. Mine was on the lower kick panel taped inside. I would not take off the back panel first. Maybe the top or the lower front if it is a front loader. It tells you how to do diagnostics and what the codes mean.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights keep flashing and door locks without finishing cycle


Kenmore HE2 Plus Front Load Washer Keeps unlocking ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?

Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...

Washing machines - Ariston



Jan 05, 2016 | Washing Machines

1 Answer

Mu washing machine is getting stuck on the rinse cycle. There is no error code coming up, just all of the light blink with the exception of wash and spin. I have unplugged it overnight and it didn't help....


Look under it for a diagnostic manual

You got codes or something there if it blinks

May have a bad control board

Need that service manual to start your testing

Sep 13, 2013 | Kenmore HE2 Plus Front Load Washer

1 Answer

Washer goes through cycle, until around 11 minutes until finished it stops, and goes into dL. Will not finish load. What does this mean?


Hi.

the error F/dL means Door Lock Error

The error is prompted when the door cannot be unlocked.

Here possible causes.

Door Latch mechanism broken
Door Switch Assembly defective
Wire Harness from Central Control Unit to the Door Latch or Switch Assembly broken
Central Control Unit (CCU)
Door Lock or Switch temporary failure (it can be reset disconnecting power)

You will probably need to replace the door lock assembly. Parts must be tested first.

Regards.

Ginko

Apr 28, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

Panel is switching back between 6 and F at the end of the cylce


http://www.applianceblog.com/mainforums/attachments/sears-kenmore/639d1187051794-he2-error-codes-he2-error-codes.pdf
Above is a link for the error codes and what they mean.
http://www.servicematters.com/maytag_library/docs/16007803.pdf
Above is your service and repair manual. with troubleshooting steps, to isolate your issue.

Jun 22, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have a kenmoore HE2 Plus front load washer that wont finish its cycle and starts blinking a F21 code


There is a strainer on the drain pump that is clogged. The manual does not mention this at all, it merely states the drain hose is kinked or clogged.

Under the front door there is a panel that is the width of the machine and is held in place by two screws, one on either side.

When you remove that you will see the pump and the the strainer attached to it. Unscrew the strainer (put a small pan under it to catch excess water) and remove to remove the junk accumulated.

-or- you'll need to replace the pump.

Also, attached to the panel is another manual that refers to the error codes you are seeing.

Dec 05, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore HE2 won't finish spin cycle


you have blockage in you drain plug. to solve this problem you'll have to remove the lower front panel of your machine by removing the 3 (1/4") screws on the vary bottom of the machine. once the panel is removed you'll see a 1 1/2" white PVC drainage plug. turn the inner plug to the left in till open. (WARNING ALL THE WATER IN THE DRUM WILL DRAIN THOUGH THIS PLUG) remove debris likes socks or everything that's there replace the panel and your all set.

May 28, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5467 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...