Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Quiet partner II is stuck in cancel/drain mode...

We have a Whirlpool Quiet partner II, about 4 yrs. old..
When I push the start button the cancel/drain cycle begins...will run in this mode for about 5 minutes then shuts off...try to start it again, same thing happens,,,cancel/drain mode begins.
tryed to get any of the other modes to work, will not accept the cycle which I select, goes back to the cancel/drain mode again...
please help !! frustrated in Ma.,,,dishes are piling up quick.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

You need a new cycle selector ...or "timer "....

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lock light stays on my whirlpool quiet partner II


If pushing and holding the lock button till the light goes out doesn't work, you likely have a problem on the circuit board.

May 24, 2014 | Dishwashers

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool Quiet Partner III Will not drain at the


Hi,
It sounds like the control unit has gone bad and you will have to replace it...the replacement is not very hard, just make sure to mark the wires so you get them back were they belong on the new unit.

How to Buy Appliance Parts Online

heatman101

Sep 18, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool quiet partner III. Clean light keeps flashing clean.


Had the same problem. Press the sani-rinse and heated dry button back and forth and it should reset.

Aug 29, 2009 | KitchenAid 24 in. KUDI02IR Built-in...

1 Answer

Whirkpool quiet partner 3 dishwasher status stuck on clean. If I press cancel it goes into a 2 minute drain cycle, but there is no water in it. It will no reset or start....just blinks clean.


if you have a heated dry option and normal wash option push those buttons back and forth three times all the lights will come on reseting the board..
push cans. and your done
if this happens again that means you have a bad heater or bad board

Aug 21, 2009 | Whirlpool Dishwashers

1 Answer

Whirlpool Quiet Partner 980


Bad control board ,replace it.

May 26, 2008 | Dishwashers

1 Answer

Whirlpool Quiet Partner 980


clean light blinkin???? ry pushing the sanirinse-heated dry--sanirinse--heated dry. tha tshould put in diagnostic mode, there also should be a trouble shooter underthe lower acess panel

Apr 09, 2008 | Dishwashers

26 Answers

Whirlpool Quiet Partner II


press back and forth between hi-tempwash and sani rinse several times to get all lights to come on if not then press sani rinse and heated dry back and forth several times. one of though combos will start the test mode. the test mode will stop the light from blinking and you can use the dishwasher again

Nov 26, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

1,827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...