My new kyocera phone will nit stay paired to my new GMC

1. Kyocera User Manual - Over 100 Million Visitors‎

   Adwww.ask.com/Kyocera+User+Manual‎Kyocera Knives
   
2. Kyocera Mita
3. Kyocera Printers
4. Kyocera Solar

5. Kyocera Instructions‎

   Adkyocera.findsmarter.com/‎Kyocera user manual: findsmarter.com
   M70/M90/M95: How to Pair - Support Knowledge Basewww.plantronics.com/us/.../detail.jsp?...Pair...PlantronicsTo pair your M70/M90/M95: Turn on your headset and put it on your ear. Press and hold the call button until you hear "pairing." Choose your language. Activate Bluetooth on your phone and set it to search. To do so: Tap PLT_M70/PLT_M90/PLT_M95 to complete the pairing process.Missing: dx ‎bt300Phonak ComPilot - Bluetooth Pairing Guide ' Phonak - life is ...www.phonak.com > ... > Wireless Accessories > ComPilotPhonakThe pairing procedure gives control over which Bluetooth devices are permitted to communicate with ... How to Pair the ComPilot with TVLink S Basestation.Missing: dx ‎bt300 ‎kyocera

Put the device into discovery mode and pair accordingly

0000

put the headset into pairing mode. while it is off, press and hold the answer button for 5 seconds (remember: FIVE SECONDS) until you see the LED flash then try to pair it with your phone.

hard reset your phone to factory settings!!

There should be a profile on your Kyocera phone for "Handsfree" note this is different from "Headset" Set it to Handsfree, and then try to pair the two devices.

I just paired one that sounds like yours with my phone and don't remember needing a pass code, but try 0000

From the quick start guide at:
http://www.kyocera-wireless.com/support/pdf/bluetooth-kyo105-quick-start-guide.pdf

PAIRING THE HEADSET WITH YOUR CELL PHONE
Note: Ensure your headset is powered off, and your cell phone is powered on.
a. Press and hold the Multi Function Button for 6 seconds until the LED Indicator flashes red and blue. A tone will sound indicating your headset is in pairing mode.
b. Activate the Bluetooth connection from your cell phone. Execute the search function to search for Bluetooth devices. When the search completes, a list of supported devices will be displayed on your cell phone screen.
Note: The headset will not be detected unless first placed in
pairing mode.
c. To start the pairing process, select KYO105 from the device list.
d. When prompted select 0000 as the passkey.

sure can
with the boom mic closed Push and hold the call button until the light around turns purple or stays a blue, then open the boom mic the color should stay on now go in to the phone settings and find the bluetooth settings and search for device once it finds it connecct to it, Remember the Passcode is 0000, and then you should be all set up.

Hello,
With the Samsung WEP210 this is a common problem (which is actually just a user error)
This is what you do:
1. Of coarse make sure the headset is charged
2. Make sure the bluetooth headset if OFF
3. PRESS and HOLD the top/middle (on/off) button until the light stays on (it will blink then should stay on continuously). That means it is now in pairing mode.
4. Tell you phone to search for bluetooth devices.
5. It should find the headset, and by default type "0000" to pair your new headset**

**You can use whatever pin code you like......but I would recommend the default which is four zeros.

Pairing your Cell Phone to your
Bluetooth Headset:

(FROM Bluetooth Headset)
1. Make sure Bluetooth Headset is fully charged!
2. Hold down talk button (center button of headset) up to
(Five) 5 seconds, then WAIT until you see a solid blue
light then immediately flip open earpiece part of headset.
THIS MEANS the HEADSET IS NOW IN PROGRAM MODE.


AT THE SAME TIME/ WHILE BLUETOOTH
IS STILL OPEN & IN PROGRAM MODE….

(FROM CELL PHONE)
1. Click on “Menu” (Left Button)
2. Scroll to Bluetooth icon. (Lower Right Hand side of menu)
3. Click “Ok” button
4. Then click on “My Devices”
5. Click “OK” again
6. Select “FIND NEW”: Cell phone searches/connects to pair up
with Bluetooth Headset.
7. Once your Cell phone discovers your new headset, select
“ADD” or click on the recently paired headset device.

8. You will then be prompted to enter a pairing code.
Use either..
a. 0000 or
b. 1111 or
c. 9999

Congratulations on paring/ connecting your new
Bluetooth Headset
w/ to your new Cell phone!