Question about Yamaha HTR-6130 Receiver

1 Answer

Yamaha HTR 6130 turns on briefly and then off again...

It will turn on and then off again within a seconf or two, sometimes "CHECK SPK CBL" flashes on the display, I have checked the speaker cables and there is no problem. This problem seams to happen in the morning and by the evening it turns back on again. Very Strange, any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Yamaha Master
  • 1,114 Answers

If you have "disconnected" all the speaker wires at the receiver then tested and this still happens, your receivers protection circuit has a problem and needs to be repaired. That is the only way to be certain it's not a short in a wire or a partially bad voice coil in a speaker. Hope this helps

Posted on Jul 26, 2009

  • Josh Oct 24, 2012

    Any idea what goes bad in the protection circuit? Seems like a common problem, I'm sure by now someone knows what goes bad and how to fix it (other than Yamaha repair shops)...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture with Yamaha 6130 reciever. have


The TV must be tuned to the correct input also. Please cycle through the tv inputs by pressing the input button on the tv one time, then wait 5 to 10 seconds for the tv to recognize the input signal. If nothing, press again. You don't say which tv you have but many newer models have 5 to 7 input sources you will have to cycle through to find your signal.

With out more information, this is just one step in finding out what could be wrong. Please rank me accordingly.

Good luck.

Feb 28, 2010 | Yamaha HTR-6130 Receiver

4 Answers

Yamaha HTR-6130 Receiver will not stay on! Shuts


One last try with everything disconnected!
Other than that I suspect internal surge damage.

Aug 04, 2009 | Yamaha HTR-6130 Receiver

1 Answer

All Yamaha HTR-6130 codes don't work on DirecTV remote


try 30176 and dont forget to assign the remote to turn up the receiver not the tv

Jul 04, 2009 | Yamaha HTR-6130 Receiver

2 Answers

HTR-6130 will not turn on


Remove all speakers from the receiver and try powering it up again. If it still shuts down odds are it needs repair of one of the output channels.

Jan 31, 2009 | Yamaha HTR-6130 Receiver

1 Answer

What's NEC PF68S33 TV's remote control code for YAMAHA HTR-6130


I had similar problem when setting up the YAMAHA remote control for my NEC LCD TV. At the end I found I did not follow the YAMAHA manual properly. Did you hold down the DTV/CBL button, and AT THE SAME TIME press the AV POWER for 3+ seconds? You should be able to "REMOTE SETUP OK" displayed in the front panel of the YAMAHA AV receiver. Hope this helps. BTW, only the TV POWER, TV MUTE and the numeric buttons work in my case.

Dec 30, 2008 | Yamaha HTR-6130 Receiver

1 Answer

No sound from the speakers when we use DVD or XBox


Take the remote and press theDVD button. That will change the sound system from TV to your DVD. When you switch back to TV, dont forget to switch this back by pressing DTV/CBL white button

Dec 28, 2008 | Yamaha HTR-6130 Receiver

1 Answer

Getting Audio to work with our Cable Tv


The HTR-6130 does not decode the audio from the HDMI inputs. It only acts as a switcher. You will need a separate audio connection from the cable box to the HTR-6130.

Dec 27, 2008 | Yamaha HTR-6130 Receiver

Not finding what you are looking for?
Yamaha HTR-6130 Receiver Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...