Question about Dell Computers & Internet

1 Answer

My pen drive is not working properly

It is displayed on pc but i cant open it. I have also taken help from control panel but it does not respond me.this is b'coz i had not properly removed it or it may be due to some kind of virus.my laptop is DELL INSPIRON 1545.

Posted by on

  • Vishal Sherathiya
    Vishal Sherathiya Jul 23, 2009

    it can not be formatted & when i try to open it i get a message the file or directory is corrupted and unreadable.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Only option you have is to format your pen drive. If U already formatted ur pen drive even though its not working than try with different computer. If U face a same issue than with different computer too than Ur pen drive is corrupted. Format it. that will help U.

Posted on Jul 22, 2009

  • Jay Patel
    Jay Patel Jul 23, 2009

    was ur pen drive had any damage? If there is any damage than only u want be able to format. Do one thing download hiren's boot disk from internet and in that software there is couple of hdd format tools try any of this. if your pen drive dunt have internal damage than it will format it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed driver as per destructions' but then zip!, re installed, naah. the pen still works but without any pressure, so at the moment, the driver is uninstalled just using it as a mouse. help


i am going to give you some ideas on how to resolve these issues.

1. go to control panel and open device manager to see it the device is showing up and check for up to date drives.

2. go to control panel and look for locate and other sensors and open the folder.

3. go to control panel and open action center go to windows program compatibility troubleshooter

4. go in to control panel open auto play is if the device show up in the other devices than select proper settings

5. go to control panel and open devices and printers and find the add a device and it will display in this area

6. go into control panel and open personalization fold change mouse pointers options

7. IF ALL FAIL HERE THAN YOU SHOULD GO TO CONTOL PANEL SELECT TROUBLESHOOTING FOLD AND FOLLOW INSTRUCTIONS.

8 . you may all so have firewall + antivirus + malware issues or conflicts with other security software and you will have to go in to each security appt. and exclude the files from the scan or interruption.

thank you rod

Mar 04, 2015 | Monoprice 12x9 Inches Graphic Drawing...

2 Answers

HPv165w recognized in Device manager...But cant open it in My computer..


Try inserting the pen drive into another computer to see if you can open the data on this pen drive.
If not you may need to format the pen drive.

Nov 24, 2012 | Electronics - Others

1 Answer

My kingston pen drive is not opening . its give message to format it but even unable to format it plz help me out.


Go to My computer, right hand mouse click on the pen drive and select Format.
If the pen drive is not visible, go to Control Panel select Administrative tools, select Computer management and select Disk management. There will be your drive. Format it from here.
Hope that helps.

Nov 27, 2010 | Computers & Internet

1 Answer

While inserting a pen drive getting message f:/ not accessible access denied the pen drive is working properly on other systems


Hello,
Is this PC on a network? if this is the case the f: drive might be taken up by another device or the System Supervisor may have tied down the system so no outside software can be put onto or taken from the system.

Regards
Alan Hood
ami-man
UK

May 18, 2010 | Computers & Internet

1 Answer

Pen drive is detecting but cant open it and in properties it shows unknown file system when i open it pc displays insert disk


maybe you need to go into windows settings and click hardware software detect, go threw the options and click the usb pen driver that it recommends, you might have to reset your computer, and it should work from there

Jul 02, 2009 | Audio Players & Recorders

1 Answer

Bought a 2gig maxell flash pen and wanted to use it for storing my work on it but i cant seem to work it and i need to save my work on this flash pen can some one please help


If you are using Win98 the problem is the USB ports themselves. You must locate and install USB drivers to make them functional. Other than that the USB should reconise the flash pen after a few minutes.
Now if it see it, to store in the drive, Save the information to a file/folder and then right click and choose SEND TO and pick the letter drive that is your flash pen and that will do it. If you can do drag and drop open the window that has your info and open a window that shows your pen drive left click and hold it down a drag it to the pen drive - when you see the + just release the left click and it should be on the pen drive.
Hope this helps you, good luck, please leave a rating, thank you kindly

Apr 26, 2009 | Computers & Internet

1 Answer

Cant store data


try re-partition and re-format your pen-drive

Apr 24, 2009 | Computers & Internet

1 Answer

Grip pen not responding


You could try recalibrating the tablet.  Open the tablet control panel, then click "About." Then hold Control while clicking "Diagnose..." and on the next screen -- the Diagnostics window -- you'll see a new button labled "Recalibrate..." Clicking that might do the trick.

Good luck.

Nov 29, 2007 | Wacom CINTIQ 18SX GRIP PEN (UP911E18SX)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Alun Cox

Level 3 Expert

2668 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...