Question about Konica Minolta bizhub 350 All-In-One Laser Printer

2 Answers

On the bizhub C550 an error code C0204..... won't let me use paper tray 2

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 44 Answers

Two things 1) check to see if there is paper in the back of the of the tray where it meets the back wall (that would prevent the paper tray from rising. 2) there is an upper limit sensor on the paper feed (thats where the rollers are) so check to see if any bits of paper blocking the sensors. If you find it, reset the machine and it will see the tray.

Posted on Dec 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 40 Answers

Step 1:
Download & Install RegistryEasy for Free. Note:If the download link doesn't work you may need to Download it Directly from RegistryEasy Site Here
Step 2:
Click the "Scan" button.
Step 3:
Click the 'Fix Errors' Button to Repair Your PC!

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica minolta c350 error c0204


Tray 2 Feeder UP/Down abnormality.
2nd Tray Lift-up motor (M9) is problematic.

Jul 07, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error code c0204


PULL out the second tray remove any and all paper from behind the draw also REMOVE all the STORED paper on the left hand side of the draw that is not a storage area. Storage draw is used. The space is for if you decide to 11x17 paper

Jan 23, 2014 | Minolta bizhub 200 All-In-One Printer

1 Answer

Code CO204


The error code C0204 deals with the first paper tray not lifting up correctly. What you can do is to turn the copier off and pull out all of the paper trays and turn back On. Once it is warmed up, push one tray in at a time to see which one codes out. To resolve the problem, there could be a piece of paper jammed behind the paper tray or if you have LTR size paper in the tray, do you have paper on both sides of the tray. Remove the paper from the left side of the paper tray or you may have to take the paper tray out to get to the piece of paper wadded behind the paper tray.... Good Luck

Jul 16, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

C 0204


C0204 is an error to tell u that behind the tray 2, you'll have a paper that satyed after a jam. remove the paper, and push the interrupter ON/OFF. it will solve the pb.

Jan 17, 2011 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Our printer is showing a malfunction error code of C0204....any suggestions?


Tray 2 elevator failure. Something is wrong with the paper lifting in tray 2. Most common cause is improperly loaded paper in the tray so I would check that first. If you can't find any issues with tray 2 then you can leave it open an inch or two and reset the code so you can still use the copier. Then have a tech look at the tray as you could have a lift motor or lift sensor going bad.
Good Luck and Thank You for using Fixya.

Nov 18, 2010 | Minolta bizhub 200 All-In-One Printer

2 Answers

I got a error code C-0204 and I`ve checked the tray 2 and is everything ok, but i still receiving this message and i cannot print. Please any help?


C0204 as I see you already know is a tray 2 elevator failure. Meaning the machine does not see tray 2 lifting up the paper. This is usually caused by improper paper loading, elevator sensor failure or lift motor failure. You can still use the copier/printer if you leave tray 2 open and inch or 2. Just use the other trays until repairs can be made.
Good Luck and Thank You for using Fixya.

Sep 25, 2010 | Konica Minolta bizhub C250 All-In-One...

1 Answer

How do I remove drawers 1 and 2 from Bizhub C200 - am getting error code C0204


Pull out the trays, locate the metal tab on the copier frame that is held in with one screw. Remove the screw and angle the tray out.

Feb 14, 2010 | Konica Minolta Bizhub-200 Minolta Printer

3 Answers

How to clear c-0204


C0204 - Tray 2 Elevator failure - The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.

1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu

Nov 23, 2009 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Bizhub 200 printer


Tray two elevator motor failure. Make sure you dont have anything sitting under the trays and also make sure the trays are level

Jun 25, 2008 | Minolta bizhub 200 All-In-One Printer

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

1,671 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...