Question about Frigidaire Kitchen Ranges

1 Answer

We have a frigidaire Oven model # PLDB998CC0 SERIAL # TH33356402. WHILE CLEANING THE OVEN CONTROL PAD WERE SUDDENLY ACTIVATED WITH CLEAN AND LOCK SIGN WHICH LATER ON DISPLAYED F9 AND ERR MESSAGE WITH A CONYINUOUS BEEP. WE CANNOT GET IT CANCELLED OR STOP IT. PLEASE LET US KNOW HOW TO STOP IT.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Frigidaire Master
  • 76,846 Answers

DISCONNECT THE POWER CORD FOR 5 MINUTES AND SEE IF IT RESETS THE CONTROL BOARD, IF NOT U WILL NEED TO REPLACE THE TOUCH PAD CONTROL BOARD. PARTS ARE AVIL AT THE WWW.REPAIRCLINIC.COM IF NEEDED.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven is stuck in lock mode


Hi Lora, this is AP!

Based on the description of the Frigidaire electric range provided it appears the door lock feature has been activated. In order to cancel the Oven Lockout feature, press clear off and hold for 3 seconds. The control will unlock the oven door and resume normal operation.

This door lock feature is activated by pressing clear off and holding for 3 seconds. "Loc" will appear in the display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display. If any control pad is pressed with the oven lockout feature active, "Loc" will appear in the display until the control pad is released.

This information is also located in the owner's manual should you like to view it again, you may retrieve a manual using your model# and the following link http://www.frigidaire.com/Owner-Center/Product-Support-Manuals/.

I hope this information helps to some degree - thanks for your question, and please do not hesitate to reconnect.

Mar 17, 2014 | Frigidaire 30" Self-Cleaning Freestanding...

Tip

How to CLEAN a Frigidaire Self-Cleaning Oven Step 1Use a plastic spoon to scrape...


How to CLEAN a Frigidaire Self-Cleaning Oven
Step 1Use a plastic spoon to scrape away any extra spillovers or burnt-on food from inside the oven. Remove as much of this as you can before running the self-cleaning cycle, because any spillovers left in the oven during the cleaning cycle may cause a lot of smoke.
  • Step 2Wipe off the inside of the oven with a rag dipped in soapy water. Be careful not to get any cleaning supplies on the oven door gasket or to disrupt the position of the gasket at all; having a good seal is critical to the success of the oven's self-cleaning cycle.
  • Step 3Clean any soil away from the oven frame and its door liner with a rag dipped in soapy water. Any soil left on these parts of the oven may become burned on during the self-cleaning cycle.
  • Step 4Pull the broiler pan and grid, any utensils, and any tin foil that may have been left in the oven out of it. They can't withstand the extreme temperatures the self-cleaning oven will reach. It's okay to leave the oven racks in the oven.
  • Step 5Make sure the oven door is completely closed.
  • Step 6Press the "CLEAN" button on the control pad. Use the up and down arrows to select the desired cleaning time; use 2 hours for a lightly soiled oven and 3 or 4 hours for a dirtier oven. The oven will lock itself and begin the cleaning cycle.
  • Step 7Wait for the cycle to end and the oven to cool; it will then unlock itself automatically. Don't try to open the oven door before it has unlocked itself.
  • on Apr 07, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

    1 Answer

    How do I use the self-cleaning function on my Whirlpool Super Capacity 465 self-cleaning oven?


    If you just want to run the basic self-clean cycle. First remove the broiler pan and racks from the oven. Next clean any heavy spills up with a non-abrasive cleaner (do not use an oven cleaner). Clean the window of the oven door and the door frame (to the outside of the gasket). Then close the oven. If the oven has a touch-pad, press the Auto-clean pad on the oven followed by Start. The oven will automatically lock and then unlock when the oven has cooled after the cleaning cycle. (I'm less certain of the control settings for the dial type of oven control.)

    In order to get your manual you need the full model number of the oven. This is on a plate located behind the storage door. This pdf, http://adcxns1.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/ca8e028c60d9804f85256a8c00621f04/$FILE/4322089.pdf , gives you a picture of where the model and serial numbers are is on page 4 as well as some of the information contained in the serial number on the subsequent pages.

    Once you have your model number, go to http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=WHRCOM and enter the model number. This should let you get the manual specific to your oven.

    I hope this helps.

    Cindy Wells

    Apr 26, 2011 | Whirlpool Microwave Ovens

    1 Answer

    How do I set the oven to self clean


    The oven door must be closed and all controls set correctly for the cycle to work properly. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap- filled scouring pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle.
    You cannot set the oven for cooking until
    the oven is cool enough for the door to unlock.
    While the oven is self-cleaning, you can
    touch the TIMER/CLOCK pad to display the time of day.
    To return to the clean
    countdown, touch the COOKING TIME pad.
    If the shelves become hard to slide,
    apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

    Using the self-cleaning oven.

    How to Delay the Start of Cleaning

    Make sure the clock shows the correct time of day. If your model has a latch, latch the door. Touch the SELF CLEAN pad. Using the + or or the number pads, enter the desired clean time. Touch the DELAY START pad. The earliest start time you can set will appear in the display. Using the + or or the number pads, enter the time of day you want the clean cycle to start. Touch the START pad. On models without a door latch, the door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. The oven shuts off automatically when the clean cycle is complete. When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door. If your range does not have a latch, the door will unlock automatically. n The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door or forget to latch the door on models with a latch. n To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, unlatch the door (on models with a latch) and open the door.

    Oct 17, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

    1 Answer

    Can I clean a TruTemp oven with soap and water without ruining it?


    Hi,

    Yes you could clean it.

    Check few details :-

    t the bottom of this post you will find the web address for your ranges manual and the self clean system is in side this manual.

    How to self clean

    If your model has a door latch, never force the latch handle. Forcing the handle will damage the door lock mechanism.
    The oven door must be closed and all controls set correctly for the cycle to work properly.
    Before a Clean Cycle
    For the first self-clean cycle, we recommend
    venting your kitchen with an open window
    or using a ventilation fan or hood.
    Remove any broiler pan, broiler grid, all
    cookware, probe and any aluminum foil
    from the oven—they cannot withstand the
    high cleaning temperatures.
    NOTE:
    If your oven is equipped with nickel oven
    shelves, remove them before you begin
    the self-clean cycle.

    If your oven is equipped with gray
    porcelain-coated oven shelves, they may
    be left in the oven during the self-clean
    cycle.
    Soil on the front frame of the range and
    outside the gasket on the door will need to
    be cleaned by hand. Clean these areas with
    hot water, soap-filled scouring pads or
    cleansers such as Soft Scrub®. Rinse well
    with clean water and dry.
    Do not clean the gasket. The fiberglass
    material of the oven door gasket cannot
    withstand abrasion. It is essential for the
    gasket to remain intact. If you notice it
    becoming worn or frayed, replace it.
    Wipe up any heavy spillovers on the oven
    bottom.
    Make sure the oven light bulb cover is in
    place and the oven light is off.
    IMPORTANT: The health of some birds
    is extremely sensitive to the fumes given
    off during the self-cleaning cycle of any
    range. Move birds to another well ventilated
    room.

    NOTE: Use caution when opening the upper
    oven after the self-clean cycle has ended.
    The oven may still be hot.


    How to Set the Upper Oven for Cleaning
    On models with Gas/Control Lockout,
    touch and hold the Gas/Control Lockout
    pad for 3 seconds to turn it off.
    NOTE: The surface burners must be turned
    off prior to the self-clean start time.
    If your model has a latch, latch the door.
    Touch the Self Clean pad.
    Using the number pads, enter the
    desired clean time, if a time other than
    4 hours is needed.
    Clean cycle time is normally 4 hours. You can
    change the clean time to any time between
    3 hours and 5 hours, depending on how dirty
    your oven is.
    Touch the Start pad.
    On models without a door latch, the door
    locks automatically. The display will show
    the clean time remaining. It will not be
    possible to open the oven door until the
    temperature drops below the lock
    temperature and the LOCKED DOOR
    light goes off.
    The oven shuts off automatically when the
    clean cycle is complete.
    When the LOCKED DOOR light is off,
    slide the latch handle to the left as far
    as it will go and open the door. If your
    range does not have a latch, the door
    will unlock automatically.
    The words LOCK DOOR will flash and
    the oven control will signal if you set
    the clean cycle and forget to close the
    oven door or forget to latch the door
    on models with a latch.
    To stop a clean cycle, touch the Clear/Off
    pad. When the LOCKED DOOR light goes
    off, indicating the oven has cooled below
    the locking temperature, unlatch the door
    (on models with a latch) and open the door
    The oven door must be closed and all controls set correctly for the cycle to work properly.

    How to Delay the Start of Cleaning
    Make sure the clock shows the correct time
    of day.
    On models with Gas/Control Lockout,
    touch and hold the Gas/Control Lockout
    pad for 3 seconds to turn it off.
    NOTE: The surface burners must be turned
    off prior to the self-clean start time.
    If your model has a latch, latch
    the door.
    Touch the Self Clean pad.
    Using the number pads, enter the
    desired clean time.
    Touch the Delay Start pad. The earliest
    start time you can set will appear in the
    display.
    Using the number pads, enter the time
    of day you want the clean cycle
    to start.
    Touch the Start pad.
    On models without a door latch, the door
    locks automatically. The display will show the
    start time. It will not be possible to open the
    oven door until the temperature drops below
    the lock temperature and the LOCKED DOOR
    light goes off.
    The oven shuts off automatically when the
    clean cycle is complete.
    When the LOCKED DOOR light is off,
    slide the latch handle to the left as far
    as it will go and open the door. If your
    range does not have a latch, the door
    will unlock automatically.
    The words LOCK DOOR will flash and the
    oven control will signal if you set the clean
    cycle and forget to close the oven door or
    forget to latch the door on models with
    a latch.
    To stop a clean cycle, touch the Clear/Off
    pad
    . When the LOCKED DOOR light goes
    off, indicating the oven has cooled below
    the locking temperature, unlatch the door
    (on models with a latch) and open the door.


    After a Clean Cycle
    You may notice some white ash in the oven.
    Wipe it up with a damp cloth after the
    oven cools.
    If white spots remain, remove them with a
    soap-filled scouring pad and rinse thoroughly
    with a vinegar and water mixture.
    These deposits are usually a salt residue
    that cannot be removed by the clean cycle.
    If the oven is not clean after one clean cycle,
    repeat the cycle.
    You cannot set the oven for cooking until
    the oven is cool enough for the door to
    unlock.
    While the oven is self-cleaning, you can
    touch the Clock pad to display the time
    of day. To return to the clean countdown,
    touch the Cooking Time pad.
    If the shelves become hard to slide, apply a
    small amount of vegetable oil or cooking oil
    to a paper towel and wipe the edges of the
    oven shelves with the paper towel.

    Hope i helped you.

    Thanks for using ' Fixya ' and have a nice day!!

    Sep 05, 2009 | GE Profile JTP18 Electric Single Oven

    1 Answer

    How to start oven in PROPANE STOVE


    Print the following infore for future ref if you wish. How it works is simple tage a look at it in Motion
    Component Test Procedure Results
    Electronic
    range control
    F1−1 –Upper Oven >650°F with door unlocked.............................
    F1−2 –Lower Oven >650°F with door unlocked.............................
    F1−3 –Upper Oven >950°F with door locked.................................
    F1−4 –Lower Oven >950°F with door locked.................................
    F1−7 –Membrane switch is not responding ...................................
    F3−1 –Upper sensor is shorted at (< 100 ω) or
    open at (>5 K ω) ...............................................................
    F3−2 –Lower sensor is shorted at (< 100 ω) or
    open at (>5 K ω) ...............................................................
    Check actual upper oven temperature,
    if > 650°F check sensor.
    Check actual lower oven temperature,
    if > 650°F check sensor.
    Check actual upper oven temperature,
    if > 950°F check sensor.
    Check actual lower oven temperature,
    if > 950°F check sensor.
    Check membrane switch for connection or damage.
    Check upper sensor, harness, and connections
    Check upper sensor, harness, and connections
    Engineering
    Test Mode
    Press BAKE pad.
    Enter 100°F using the number pads.
    Immediately push and hold BAKE pad for appropriate oven
    approximately 3 seconds.
    This mode can also be entered by pressing the hidden pad
    for 3 second located to the left of the lower oven light pad.
    Used to view the actual oven temperature for both ovens at all
    times, even when an oven function is active.
    This mode will also display the current fault code for 5
    seconds in the time digits.
    Fault codes
    accessed
    through
    Engineering
    Test Mode
    F0−0 –No fault .................................................................
    F1−5 –Upper hardware failure within control ....................
    F1−6 –Lower hardware failure within control.....................
    F1−8 –Shorted key in membrane switch ..........................
    F1−9 –Internal communication errors within control .........
    F1−A –Upper latch switches ............................................
    F1−B –Lower latch switches.............................................
    F1−C –Upper door switch.................................................
    F1−D –Lower door switch.................................................
    F1−E –Sensor input not calibrated ...................................
    F1−H –EEPROM error .....................................................
    F1−L –Temp in ovens are the same for long period .........
    F1−N –Internal voltage on control not working .................
    F9−1 –Upper lock switch is not correct.............................
    F9−2 –Upper unlock switch is not correct.........................
    F9−3 –Control does not see upper door lock....................
    F9−4 –Lower lock switch is not correct.............................
    F9−5 –Lower unlock switch is not correct.........................
    F9−6 – Control does not see lower door lock ...................
    EE –Control cannot read E-PROM. Unit will shut down.
    Default from factory
    Replace control
    Replace control
    Check membrane connection
    Replace control
    Check latch wire harness
    Check latch wire harness
    Check lock wire harness
    Check lock wire harness
    Verify sensor is operating properly
    Replace control
    Verify sensor is operating properly
    Replace control
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Disconnect power for 60 seconds. If EE reappears, replace ERC
    Test Mode This mode must be activated within the first 5 minutes of
    power up.
    Press BROIL and CANCEL pad for approximately 3 seconds.
    If oven temperature is greater than 400°F, the Test Mode
    cannot be activated or will abort if active.
    Press and hold individual pads for 4 seconds to activate.
    Display will have dashes in all segments to indicate the mode is
    active.
    Upper Bake: Energizes upper bake element
    Lower Bake: Energizes lower bake element
    Upper Broil: Energizes upper broil element
    Convection Bake: Energizes convection fan
    Upper Oven Light: Energizes upper oven light
    Lower Oven Light: Energizes lower oven light
    Upper Clean: Energizes upper motorized door lock
    Lower Clean: Energizes lower motorized door lock
    Stop Time: Energizes Beeper
    Cook Time: Displays error codes
    Timer 1: Energizes ROM version
    Timer 2: Energizes EEPROM version
    Keep Warm: Cooling Fan
    Clock: All display segments light
    If functions do not perform as specified, replace ERC
    Oven
    temperature
    adjustment
    Push BAKE pad.
    Enter 550°F using the number pads.
    Immediately push and hold BAKE pad for appropriate oven
    approximately 3 seconds.
    To decrease or increase oven temperature. Push AUTO SET
    pad until negative or positive numbers appear. Oven can be
    adjusted from -35° to +35° (-37.2° to + 1.6° C) in 5° F (2.7° C).
    To avoid over adjusting oven move temperature -5° each time.
    Push OVEN CANCEL button.

    Sep 04, 2009 | Frigidaire 30 in. Electric Gallery Series...

    1 Answer

    Range Cleaning Cycle not Working


    All F3-E Codes - Oven Temperature Sensor (RTD) or Warming Drawer Defect - Replace oven temperature sensor (RTD).


    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

    Feb 22, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

    1 Answer

    Oven Door Locked


    the oven door does lock during self clean, otherwise it will not work. however, the door is supposed to unlock after the oven has cooled. if it is still locked, turn the oven to self clean and wait about a minute and then hit cancel and see if the door unlocks. if not, there may be a probelm with the door lock mechanism. Joe

    Nov 18, 2008 | Frigidaire 30" Self-Cleaning Freestanding...

    1 Answer

    Maytag gemini self cleaning oven feature


    Close door on lower oven (upper oven is not self clean). Press "Clean" pad. Press More pad or Less Pad. H is 4 hour clean, M is a 3 hour clean cycle and L is a 2 hour clean cycle. The door will lock and cleaning will begin. Good Luck!

    Dec 18, 2007 | Maytag MER6872BAS Gemini Electric Kitchen...

    1 Answer

    Lighting the oven


    Control Lockout (on some models)
    Your control will allow you to lock out the
    touch pads so they cannot be activated when
    touched or cleaning the glass panel.
    To lock the controls:
    Touch the 9 and 0 touch pads at the
    same time for 3 seconds until the
    control beeps twice. The display will
    show LOC continuously and the time
    of day if not blacked out.
    NOTE: All cooking and timing functions will be
    cancelled when locking out the control.
    To unlock the control, touch the
    9 and 0 touch pads at the same time
    for 3 seconds until the control beeps
    twice, and LOC will be removed from
    the display.
    NOTE: Some models have a Control Lockout
    pad. Touch and hold it for 3 seconds to
    lock/unlock.
    Gas/Control Lockout (on some models)
    Your control will allow you to lock out the
    surface burners, oven burners and control
    panel so they cannot be activated.
    To lock/unlock the controls:
    Turn all surface burners off.
    Touch and hold the Gas/Control
    Lockout pad for 3 seconds until the
    display shows LOC ON.
    To unlock the control, touch and hold the
    Gas/Control Lockout pad for 3 seconds
    until the display shows LOC OFF.
    When this feature is on and the touch pads
    are touched, the control will beep and the
    display will show LOC ON.
     The control lockout mode affects all
    controls. No controls will work when this
    feature is activated.
     The adjustment will be retained in memory
    after a power failure.

    Nov 30, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

    Not finding what you are looking for?
    Kitchen Ranges Logo

    Related Topics:

    18 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Kitchen Ranges Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    Ismael Rodriguez...

    Level 2 Expert

    171 Answers

    Mike Carew

    Level 3 Expert

    969 Answers

    Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...