I bought my golfbuddy voice 2 with the cord package in October, 2016. I use it 3 times a week. Last week, out of no where, the cord "disappeared". Now, it won't fully charge. can you help?

Question moved from MISC to Gold Buddy category.

Video and text articles

https://www.google.com/search?q=Golf+Buddy+GB+Voice+2+change+meters+to+feet

Yards and meters - GB VOICE2 GPS - GOLFBUDDY

https://golfbuddy.zendesk.com > en-us > articles > 3600...
Jan 15, 2020 - To change your GB Voice2 from yards to meters or vice versa press and hold the ( ) button on the Golf Mode screen to change between Yards or ...

Contact manufacturer for assistance.

https://help.golfbuddy.com/contactus.asp

https://en.golfbuddy.com/products/voice2.asp

It should set automatically when it finds a satellite but you can set it manually by pressing and holding the O Button on the front.

Go back to where you purchased skylink for resolution to your issue.

It has a rechargeable battery. However if you need to replace you may have to send them their RA dept.

Shown in the link below, you would have to send your Voice into our RA department to replace your battery. Please contact us at 888-251-6058 or email us directly at [email protected]. Regards, GolfBuddy
Golf Buddy Voice GPS Unit

Dolly, Check the attached links to see how to change language,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://www.golfbuddyglobal.com/doc/quickguide_voice_english.pdf

GolfBuddy Global Accuracy Matters

http://www.sportsbackup.se/pictures_org/GB%20-%20World%20User%20Manual(1).pdf

Try charging your voice twice, I've found this works

Use a micro USB cord, either connected to a wall wart or computer. Lift the top corner protector flap to insert it. Then turn the unit ON. This is the only way I have found that it will charge. There is no indicator that it is fully charged so I just leave it on overnight.

Press the Transfer key
Prompt: ENTER PGM ID: Enter 200
Prompt: PASSCODE: Enter 1234
Display shows: DISABLE
Press 1 to change to ENABLE
Press the Speaker key
Enter 505
Current Date/Time shows in the format: WMMDDYY:HHMM
W=Week day where 1 = Monday, 2 = Tuesday etc.
HH = Hour in military format
Enter a new Date/Time in the same format. noce the last digit is pressed it will automatically save.
For example: 3102908:1645 is what you would enter for Wednesday, October 29th, 2008 @4:45pm.
Press the Transfer key to exit.

Go to:
http://www.emersonelectronics.ca/emerson/en/product/details/VLJT600
or
http://www.emersonelectronics.ca/emerson/en/category/list/694

The solution appears to be common for all recent Emerson SmartSet(tm) radios (BTW it's not the clock fault, it's the law).

Remarkably Emerson foresaw this, so here we go.

Short version (may require three hands :-) )

DST start:
Press and hold MONTH/DATE and ALARM 1 buttons for at least 3 seconds until the display changes to something like "4 F" (Fourth month, First week) alternating with something like "4. 1" (April 1st, for 2007) or "4. 6" (April 6th, for 2008). While holding down the MONTH/DATE and ALARM 1 buttons, now press the DOWN or "-" Set button (3 times) until "3F2" shows (Third month, second week) alternating with something like "3.11) (March 11th, for 2007) or "3. 9" (March 9th, for 2008). Let go of all buttons and we are now half done.

DST end:
Press and hold MONTH/DATE and ALARM 2 buttons for at least 3 seconds until the display changes to something like "10 L" (Tenth month, Last week) alternating with something like "10.28" (October 28th, for 2007) or "10.26" (October 26th, for 2008). While holding down the MONTH/DATE and ALARM 2 buttons, now press the UP or "+" Set button (1 time) until "11 F" shows (Eleventh month, first week) alternating with something like "11. 4" (November 4th, for 2007) or "11. 2" (November 2nd, for 2008). Let go of all buttons and we are now done.


This should remain until either the lithium battery fails or Congress undoes its work.


BTW the Emerson addendum has a history error. The time change in the first Sunday in April and the last Sunday in October did not start in 1966, but in 1987. Before that starting in 1966 the standard was set at the last Sunday in April and the last Sunday in October. Except for 1974, when it was January 6th, 1974 (DST start) and October 27th, 1974 (DST end) and in 1975 when it was February 23rd, 1975 (DST start) and October 26th, 1975 (DST end). Before 1966, state and local governments had many different rules. Source: http://webexhibits.org/daylightsaving/e.html