Question about Samsung SGH-i900 Omnia Unlocked Cellular Phone

2 Answers

Touch screen my omnia touchscreen is not responding. any solutions?

Posted by on

  • mbrooksteve Jul 31, 2009

    Thanks a lot

  • Take your fingernail and run it along the screen and the plastic housing. Push hard as you do it, and it will free up the screen. This has happened to me as well. and it works for me. this was given by mephisto250 on youtube.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 749 Answers

Hi, you can try a hard reset, simply try to take out the battery for ~30mins and then try again. If you are still having problems then you may need to upgrade the firmware / software of the phone, for this simply visit the Samsung website, finally if none of the above works then you have a hardware issue in most cases you will have to get the touch screen panel replaced you will have to go to your local phone shop for this.

Hope the above helps

Muzzi_123

Posted on Jul 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Take your fingernail and run it along the screen and the plastic housing. Push hard as you do it, and it will free up the screen. This has happened to me as well. and my phone's working now. this was a solution given by mephisto250 on youtube. :)

Posted on Dec 03, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tablet is not responding ,to any comands


Touch Screen Not Working Android Problem [Fix] - TechKhoji

www.techkhoji.com > Android
Feb 27, 2014 - How can I reboot my tablet, the touchscreen is not working. ....Sometimes when I turn on the screen it doesn't respond to my fingers. Then I ...

Android Tablet Touch Screen Problem Solution - YouTube

? 21:36
https://www.youtube.com/watch?v=h7_aqvkfKL4
Jun 16, 2014 - Uploaded by SOLOMON BOTCHWAY
I CANT Believe it, i Actually fixed my tablet.. all i did disconnect the ... my touch is working how to fix the screen not showing? ....2 WAYS TO FIX IPAD TOUCHSCREEN NOT RESPONDING - WORKING - Duration: 5:17.

Samsung galaxy Tab S 10.5 not responding by touch ...

? 2:54
https://www.youtube.com/watch?v=XkK9zCx46gs
Jul 7, 2014 - Uploaded by Linkhunter
i just the new tablet by samsung i recharge the tablet after that isnot responding by touch and so Sim card do ...

Touch Screen Not Responding ' DaniWeb - DaniWeb IT Discussion ...

www.daniweb.com > ... > Hardware > Mobile and Wearables


Jan 11, 2016 | Tablets & eReaders

2 Answers

My Bernina Artista 170 Sewing Machine Touch Screen is not responding, Touch Screen just not working, Touch Screen is maybe cracked, can it be replaced ?


Maybe Cracked screen???
If broken, the screen is just like cellphone screen, digitizer is also broken and screen won't respond to screen touches... Find a trained repair shop. EmbroideryServices

Apr 20, 2014 | Bernina Artista 170

1 Answer

My touch screen stopped working on my samsung impression so i put the rest code in and the phone reset then its now stuck on the calibration screen and the touch screen wont respond


Dont kno if "Impression" is similar to "Omnia" but 'REMOTE SCREEN ALIGNMENT' program installed on PC skips 'align screen' on your phone. Also "welcome.not" (made in notepad) & pasted into your root files. A REGISTRY EDITOR will allow you to input the touchscreen configuration numbers manually. Of course, none of these will be much good if you dont have 'Windows" phone or cant access your Registry!!

If all this fails, ASK 'XDA DEVELOPERS', or 'MoDaCo'.

Oct 29, 2010 | Samsung SGH-A877 Impression Cell Phone

1 Answer

My garmin nuvi 660 touch screen dosen't work


To calibrate the touchscreen on a nuvi 300 or 600 series:
  1. Power the unit On.
  2. From the Where to? / View map screen, touch Settings (wrench icon).
  3. Touch Display.
  4. Touch Recalibrate.
  5. A new screen will display that says Press Dot.
  6. Touch the center of the dot.
  7. Keep touching the center of the dot as it moves around the screen.
  8. When Calibration Complete appears on the screen, please touch OK.
The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:
  1. Connect your nuvi to your computer with a compatible USB cable.
  2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
  3. Open the Garmin folder.
  4. Locate and delete the GUPDATE.GCD file.1
  5. Safely disconnect your nuvi from your computer.
  6. Power the nuvi Off.
  7. Power the nuvi on by holding the power button.
  8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
  9. Touch the center of the dot as it moves around the screen.
  10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

Oct 24, 2010 | Garmin Nuvi 660 GPS Receiver

1 Answer

I have a garmin nuvi 660. the touch screen isn't working


To calibrate the touchscreen on a nuvi 300 or 600 series:
  1. Power the unit On.
  2. From the Where to? / View map screen, touch Settings (wrench icon).
  3. Touch Display.
  4. Touch Recalibrate.
  5. A new screen will display that says Press Dot.
  6. Touch the center of the dot.
  7. Keep touching the center of the dot as it moves around the screen.
  8. When Calibration Complete appears on the screen, please touch OK.
The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:
  1. Connect your nuvi to your computer with a compatible USB cable.
  2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
  3. Open the Garmin folder.
  4. Locate and delete the GUPDATE.GCD file.1
  5. Safely disconnect your nuvi from your computer.
  6. Power the nuvi Off.
  7. Power the nuvi on by holding the power button.
  8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
  9. Touch the center of the dot as it moves around the screen.
  10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

Oct 24, 2010 | Garmin nuvi 650 GPS Receiver

2 Answers

My buttons on my phone works but my touch screen is not responding to anything at all.


check MENU settings may be touchscreen is off ,else touchscreen loop is broken

Aug 02, 2010 | Cell Phones

1 Answer

Touch screen does not work


Hi,
The problem is a faulty contact from the touchscreen leading to the phone board.On the right side of the phone were the volume buttons are, under the touchscreen is the screen's contact. Try "detaching the screens face a little from the phone body exactly at the volume down button(using ur fingernail or something).Use thin knife ..Gently stick a knife in just to the side of the touch screen and then push the knife away from the the screen so that it looks like the screen is going to pop out, this should then re-establish the connection between the screen and the phone board.

Please do rate the solution if the issue is

resolved or post a comment for further

assistance.


thank you for using fixya have a nice day:-)

Jul 28, 2010 | Samsung Omnia Cell Phone

1 Answer

ELo touch screens not responding to the touch?


is the screen worn? you might need to replace the touchscreen glass

Aug 31, 2009 | Elo 15" Touch Monitor

1 Answer

My 2 year old Garmin Nuvi 680's touch screen no longer responds. I have tried "re-booting" but that doesn't work. Is there anything else I could try?


there's not much you can do if the screen is not responding.
the solution is to replace the touchscreen preferably at a specialized center.

Aug 21, 2009 | Garmin Nuvi 680 GPS Receiver

2 Answers

Nintendo DS touchscreen problem


try calibrating the touchscreen....

Jan 08, 2008 | Nintendo DS Console

Not finding what you are looking for?
Samsung SGH-i900 Omnia Unlocked Cellular Phone Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Fotis Papastamatiou

Level 2 Expert

96 Answers

Bill Long

Level 3 Expert

587 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...