The cable here looks like the power cable hookup, so this is a good start. You will need at least three wires from this harness. The red, black, and yellow. If you are only using this as a display and nothing else, you will still need the "Hideaway Unit" to connect up any RCA video. Do you have that piece too? It has a special cable that fits into the large connector on the back of the deck on the left. Without that, I think you may be in trouble.
SOURCE: Navigation unit for the CQ VD7500U
I BUY THE MODULE TV TUNER OF INTERFACE OF A PANASONIC CQ-VD7500U IF YOU HAVE IT IN SALE WARN ME I AM INTERESTED MY MAIL IT(HE,SHE) IS [email protected] SALU2
COMPRO EL MODULO TV TUNER DE INTERFASE DE UN PANASONIC CQ-VD7500U SI LO TIENES EN VENTA AVISAME ESTOY INTERESADO MI CORREO ES [email protected] SALU2
SOURCE: what wire do i hook the remote wire to coming from the amp?
Hello cjfatback,
You want the blue/white wire.
Here's what the manual shows:
Red - Power (to ACC in vehicle)
Black - Ground
Yellow - 12V positive (battery lead)
Blue/White - External Amplifier Control Lead
White - Left Front Spkr +
White/Black - Left Front Spkr -
Gray - Right Front Spkr +
Gray/Black - Right Front Spkr -
Green - Left Rear Spkr +
Green/Black - Left Rear Spkr -
Violet - Right Rear Spkr +
Violet/Black - Right Rear Spkr -
The red and white RCA pigtail leads is for AUX input
Left set of Preamp Outputs - Rear Channels
Right set of Preamp Outputs - Front Channels
Only Models C3433U, C3304U, and C3333U have a 2nd set of RCA pigtail leads for subwoofer output.
Hope this helps.
SOURCE: just need to know which wire goes where
orange is normally illumination(not necessary) other is probably cell phone mute
SOURCE: i need a wiring diagram color code for a panasonic
look on this site:
http://www.the12volt.com/
135 views
Usually answered in minutes!
×