- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello & Welcome to FixYa Error code F0 is displayed due to electronic oven control failure and the only way to solve this problem is by replacing the control board which is bad. Sorry for the bad news but hope you understand... Please get back to me if you have any other questions. Kevin
Hi Thanks for using FixYa. Error code F0 means failed thermistor/transistor in control and to resolve this issue you'll have to replace the Electronic range control (ERC). Please rate the solution if the issue is resolved or post a comment for further assistance. ThanksRylee
Hello, I had the same FO error. It turned out that the ribbon cable from the
front panel was not making good contact where it mated with the circuit
board. Remove ribbon cable and clean contacts on ribbon cable. Replace
cable and problem should resolve.
F0 means no error. press cancel to clear display. If you cannot then that key might be stuck, just a guess. I have your tech repair manual with failure codes and troubleshooting on page 43. This NOT a user guide. It is meant for qualified peeps. So be careful. Late model double oven tech repair manual HERE
The F0 usually means that there is a problem with the keypad.
My solution for the F7 problem may help. You will find my solution at the following link.
I have now shared my fix with over 1600 folks and most report success. I hope that it works for you too. Please let me know at: firstname.lastname@example.org