Question about Citizen Eco-Drive BL006056H Wrist Watch

1 Answer

Display is just blinking

Uct and 12:00 is blinking. All buttons will not respond to any commands.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 161 Answers
Re: display is just blinking

Try reading instructions, if you do not have them. go to the citizen web site they can be downloaded free of charge

Posted on Dec 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to set the time in titan zoop c3001pv04

I am sorry but the time cannot be changed. But there is another option in which you can not see the date. Press mode button or the bottom left button until display shows T2 in the bottom left side. Press Reset button or the upper left button. Thus will make the hours number blink. Set the time using ST/STP button or the upper right button. To set the minutes, press Reset button or upper left button and the minutes number will blink and set it using the ST/STP button or the upper right button.

Dec 02, 2014 | Watches

1 Answer

I need to know how to set my skmei watch 0955

  1. Continue to press the MODE button until the second digits blink.
  2. Click the START button to reset the seconds to zero (00).
  3. Press the RESET button and the minute digits will blink.
  4. Click the START button to set the minutes. Hold down on the button to increase the speed.
  5. Press the RESET button and the hour digits will blink.
  6. Click the START button to set the hours.
  7. You can select between 12-hour and 24-hour display modes. A "P" indicator signifies it to the afternoon 12-hour setting, a "A" indicate in the morning and a "H" means that it is the 24-hour setting.
  8. Continue this pattern to set the day of the month, month, and day of the week, respectively. 9 Press the MODE button to finish and exit.

Feb 20, 2014 | Watches

1 Answer

Setting military time

If you mean switch from 12h to 24h and vv,all you have to do is to press the "ADJUST" button until digits on the display blink.Then press the "MODE" button until 12H blinking appears.Press the "START-STOP" button to switch to 24H.When finished press the "ADJUST" button again.

Dec 14, 2013 | Casio G-Shock G-Rescue Tide Graph Watch

1 Answer

I have a Puma Led Watch and I don't know how to change the time that displays. Can you, please, help me?

click on the top right button to view time, then click bottom right button and hold it as the time is still appears. then it will start blinking. if you press the bottom right button you will be able to swap the command you want to change (H,Min,Y,D,M) and if you press the top right button you can increase (only) the number you like. Left buttons i dont know what they do :P

Jan 18, 2011 | Puma Watches

1 Answer

How to set the hands to match the correct digital display on my Casio wave ceptor 2734 wva-104h watch

Setting Digital Time
  1. The digital timepiece on a watch is set using the function buttons on the outer part of the watch face. To set the digital time, press and hold the upper left button until the seconds starts blinking. Press the lower right button to reset the seconds to "00."

    Push the lower left button to move to the Daylight Savings Time portion of the watch. Use the lower right button to toggle between "On" and "OFF."

    Press the lower left button twice. The hours unit will start blinking. To advance the hour, press the lower right button repeatedly until the correct hour is displayed. If you need to move the hours unit backwards, press the middle right button until the correct hour is displayed. When the hour is set, press the lower left button to switch to minutes, and use the same commands to change the minutes unit.

    After the time is set, press the upper left button to exit the digital time setting function.
  2. Setting Analog Time
  3. You may find after setting the digital timepiece that the analog display does not match. When this occurs, you need to set the analog time. To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink. This indicates that you are in analog time setting mode.

    Analog time adjustment is completed using the lower right button. Every time you press the button, the analog time will advance 20 seconds. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. Once the analog time is set, press the upper left button to exit the analog time setting mode.

Aug 21, 2010 | Casio Watches

1 Answer

Bought a cheap digital watch at Academy. I dont see a brand name on it only "sport". The band is sewn onto the watch so cant see the modle #. Please help me figure out how to set the darn thing!

mcdevito75 here, we"ll try, Press 1 button at a time, when you presss mode the display will blink, you may not have a button for mode rather an indent that you"ll have to push in with a toothpick, once the display is blinking press set for each function, Hour, Minute etc, after each function is set press mode to move on to the next function. When done press mode to retirn to staedy display.

Jun 27, 2010 | Watches

1 Answer

I have a Series 118 Pierre Cardin Quartz alarm with 3 buttons: Light, Set and Mode; I can't figure how to set/change the time

mcdevito75 here, The mode button is the button you need to depress to set the mode of the watch. Depress the mode button once, see if anything on the face is blinking, if it is use the set button to adjust the time/date You may have to depress the mode button twice or depress and hold down the mode button a couple of seconds to get the face/display of your watch to blink, after you make 1 adjustment to move to the next depress the mode button again until you get to the next adjustment, or the next function to set on your watch. After you"ve set all the functions depress the mode button again to stop the blinking a show a steady display.

Jun 12, 2010 | Watches

1 Answer

Lost instructions for Lexon world time clock model Planete

to set the alarm, press and release the "alarm" button; then press and hold the "set" button until the hour begins to blink. press "adv" until
the hour AM or PM is correct;now press and release "mode" so that the minutes begin to blink. Set the minutes using "adv"; now press and release "set". Finally,
press and release "adv" once to bring up (or remove) the alarm icon. Then press"alarm" once to return to the main display.

To set main display, press and hold "set" until the hour begins to
blink; press "adv" repeatedly until hour AM or PM is correct. Now
press "mode" so that the minutes blink, and use "adv" to get the
minutes right; then press "mode" so that the next item begins to
blink; use "adv" to advance until it is correct, then press "mode"
so that the next item blinks, and so forth until you're all done.
Finally, press and release "set".

Aug 10, 2009 | Watches

1 Answer

Unable to set time

The time on this watch is set by changing the digital display time then transferring the digital time to the hands.
1 - Turn the crown until the mode hand points to the time mode [TME].
2 - Press either button (A) or (B) to select the city for which the time is to be set.
3 - Pull the crown out to the second click (3) to enter time setting mode.
4 - Pressing button (A) will change the digits to be set. These digits are the ones that are blinking. Press button (A) to select the digits that you want to change.
When button (B) is pressed in the [SMT] daylight savings time correction mode, DST can be turned ON or OFF.
When button (B) is pressed with the seconds digits blinking, the seconds will return to "00".
5 - Turn the crown clockwise to advance the hours or minutes when those digits are blinking.
Although the crown may be turned in either direction, you should always turn it clockwise to the final setting.
6 - When the 12H/24H selection is blinking, pressing button (B) will turn it On/Off.
7 - After correcting the time on the digital displays, push the crown in to normal position (1) to complete time setting.
i think this may solve ur problem

thank u.................

Jul 29, 2009 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

The display of my casio GL150 is frozen

Try to hold down the light button for a few seconds.

Apr 06, 2009 | Casio G-Shock GL150-2V Wrist Watch

Not finding what you are looking for?
Citizen Eco-Drive BL006056H Wrist Watch Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts


Level 3 Expert

18258 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2334 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides