SOURCE: Kenwood KDC-MP208 Clock Set
Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.
SOURCE: KENWOOD KDC-138 SET THE CLOCK
set the unit to standby and press and hold the select button.(the up,down,left, right button on the left of the cdplayer)
SOURCE: How do I set the clock on the Kenwood KDC-138
Look on page 11 under Manual Clock Adjust.
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/kdcmp238.pdf
SOURCE: I have a kenwood radio model kdc-135 and can not set clock or sh
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDC-135.pdf Here's the manual link from Kenwood and it's on page 13. Hope this helps
SOURCE: Don't know how to set clock on kenwood kdc-138 without manual
change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute
42 views
Usually answered in minutes!
×