Question about D-Link DIR-625 (790069292637) Wireless Router

1 Answer

D-Link DIR-625 - Unsecure connection

When connecting wirelessly, I have noticed that my previously secure network connection is now unsecure. How do I change this back so that my wireless network connection is secure?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers
Re: D-Link DIR-625 - Unsecure connection

How do you know that you are connecting and there is no security? There first thing to check is the router settings. You should type into the browser (or whatever you have configured your router's IP address for). Enter the user name and password for the router. On the next screen you will notice a link for wireless settings. Click this and on the new page check the bottom section that says "Wireless Security Mode". It should be set to something other than "none". Post back and let me know what it is set to.

Posted on Nov 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I secure my wireless connection

Hi Joyce,
Either you have to setup the Encryption password ( network key ) or you need to contact your ISP ( internet service provider ) to do so.
Click on the link below and it will guide you how to set security to your router ( network )
Secure D-Link Wireless Router

Nov 13, 2011 | D-Link DIR-300 Wireless Router

1 Answer

On my D-Link Dir-825 Wireless Router, can I change my wireless networks name without having to go around reconnecting all the computers in my house afterwards

If your network is "unsecure", which means no pass keys will be provided by client computer when they connect, then you can do it. Just change your SSID from your router's admin interface and your connecting computers will recognize it as a new network and try to negotiate connection. If there is a passkey, then the connecting computers will be prompted for a pass key (though it is an old pass key) since they recognize it as a new network.

Feb 01, 2010 | D-Link DIR-825 Wireless QuadBand Router

1 Answer

How to remove a network/signal?

Connect to the unsecure network, either directly with a cable, or connect via wifi. Once you are connected, open your web browser and go to:

There should be no password, just hit enter, then you can change the SSID and/or channel, etc.

I pulled the instructions from Belkin support:

Good Luck!

Jan 26, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Had a wireless network. Today Time Warner had fire at office and entire city internet went down. System back up and my secure wireless connection is lost. I have a dlink connection, but it is now unsecure....

HI! to secure the dlink wireless network, u need to access the setup page of the router, pull up a browser and type in at the url: and it will ask the username and password, by default the username is admin and password, just leave it blank and it will show the setup page, on the left side select on wireless settings and manual settings, you can select any option here on what type of security u will set. once setting is done u have to save the settings.. once done u have to connect ur wireless computer to the secured wireless network that u create it will ask the password and connect

Aug 13, 2009 | D-Link Xtreme N DIR-655 Wireless Router

2 Answers

D-link Router DIR-625 resets itself

You need to open the router's setup page (admin page) to enable the wireless security

Feb 13, 2009 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

DIR-655 wireless intermittment - connections drop -

Any one with a mac ... MAKE SURE "Enable Auto Channel Scan : " is OFF.

CHANGE the name of the WIFI Network.

SET the Channel to CH11 [Others interfere with phone signals]

SET Security to WPA, TKIP Cypher, 3600. Then enter your password [min 8 all lowercase chrs] Change it when you are working.

Save and unplug the router and you will be fine.

Feb 08, 2009 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

Wireless connection

Try to remove preferred network and reconnect to your wireless network
-How to remove preferred network?
1. Just go to wireless connection properties
2. Click wireless network TAb and remove preferred networks
3. Press OK.

-Next is try to reconnect to your wireless network again

Oct 04, 2008 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

D-Link Wireless Router DIR-625 unable to connect with D-Link DWA-130 adapter

Sometimes the security settings will only let certain MAC addresses connect to the network as well as the password protection. Make certain that yours isn't filtering out MAC addresses.

Aug 10, 2008 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Cannot connect

The vista is wireless?
Right click the computer icon on the bottom right hand>click connect to a network>then click network and hit connect if its secure it will ask you for the security if not just click connect anyway.

May 09, 2008 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Can't figure this D-link out

does it have encrypion set up on it? if so, are you putting in the correct security key?

also, are you sure you're trying to connect to YOUR wireless network. you may be trying to connect to another network nearby?


Mar 03, 2008 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
D-Link DIR-625 (790069292637) Wireless Router Logo

Related Topics:

1,026 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides