What does the triple e error code on a Mettler Toledo scale

Not a Washing Machine and too specialized for Fixya. There is nothing online regarding Error 3.

Contact their Support phone line direct.

https://www.mt.com/ca/en/home/service/support-and-repair/support.html

https://www.google.com/search?q=mettler+toledo+FP90+error+03+error

..

Question edited for clarity.

This appears to be an original scale power supply

https://www.coleparmer.com/p/mettler-toledo-power-adapters/64437#

More here including generic Amazon power supply adapters

https://www.google.com/search?q=mettler+BB600+power+supply

If you literally just need the cord itself, go to any good electrical store.

..

It sounds like a power issue.

User Manual - Mettler Toledo

Mettler Toledo https://www.mt.com > ind > IND_PDF > manuals PDF After switching off/on or after a power interruption, the device continues to work with the saved zero point and tare value. Page 26. Settings in the menu. 22.

• 
  

  User manual METTLER TOLEDO Weighing terminal IND435

  https://www.mt.com > Editorial > Generic > Op... PDF
  2.1 Switching on and off. Switching on. ? Press . The scale conducts a display test. When the weight display appears, the scale is ready to weigh.
  
  ..

Procedure may be in one of the free manuals, or if needed, contact the manufacturer for assistance.

https://www.manualslib.com/products/Mettler-Toledo-Ind690-5136950.html

How to get consecutive number to appear on print docket

Where can I find manual for Mettler P1210N top loading balance

The tolerance for a 1 gram weight on a Mettler PM-6000 F precision balance is 0.1 mg (0.0001 g). This means that the balance is able to accurately measure the weight of an object to within 0.1 mg of its true weight.

To calibrate the Panther Metler Toledo PTPN-1000X-023 weight scale, you can follow these general steps:

1. Turn on the scale and allow it to stabilize for a few minutes before use.
2. Press the "Calibrate" button on the scale's control panel. If there is no "Calibrate" button, check the scale's manual for instructions on how to enter calibration mode.
3. The scale will prompt you to place a known weight on the scale's platform. This weight should be within the scale's capacity and should be a weight that is used regularly in your process.
4. Place the known weight on the scale's platform and wait for the scale to stabilize.
5. Press the "Enter" button or follow the on-screen instructions to confirm that the weight is correct.
6. The scale will perform a series of internal checks and may prompt you to repeat the process with different weights.
7. Once calibration is complete, the scale will return to normal operation.

It's important to note that this is a general guide and the steps may vary depending on the specific model of your scale. Please refer to the instruction manual of your Panther Metler Toledo PTPN-1000X-023 scale for detailed instructions on how to calibrate it.
Additionally, it's important to ensure that the mixer is also properly calibrated and working correctly to ensure accurate measurement of your PVC material. It's recommended to contact the manufacturer or a professional technician for further assistance in case of any doubts or troubleshooting.