MY bradkir 1 plate induction oven keeps showing a E9 after a few minutes of cooking and then switches off.

To cook an individual frozen pie in your Panasonic convection/grill/microwave, you can follow these steps:

Preheat the oven to 375°F.
Remove the pie from its packaging and place it on a microwave-safe plate.
Place the plate in the center of the microwave and close the door.
Press the "Convection" button on your microwave and set the temperature to 375°F.
Set the timer for 25 minutes.
Press "Start" to begin cooking.
After 25 minutes, check if the pie is cooked by inserting a toothpick into the center of the pie. If it comes out clean, your pie is ready! If not, continue cooking for another 5-10 minutes until it is fully cooked. This is a general guide and there might be variance with your particular device.

Things brake and parts fail.

my problem is E6 code & 1 or 2 minutes automate stopping

plz specify the brand name & model no of the microvave to get specific answer

Dear Sir i have an prestige induction cook top model PIC 3.0 the problem is that it displays an E7 error whenever switched on after appx. 1 minute and the food is not boiled /cooked. please let me know what is the problem How Can Solved this Problem This prestige induction cook top model PIC 3.0 Only one week so please do need full

thx... Kundan singh Rana Baddi (H.P.) 09857455945 [email protected]

There is a error message there, it indicate a problem with your induction cooker. It cause a defective winding wire or circuit controllers your know induction cooker works similar to the principle of electro magnet induction, it give heat to metal cooking pot. I hope I give you a idea regarding what happen to your unit.

It's best to put the popcorn bag on an upside-down paper plate, and be sure it's off-center, not in the center of the turntable.

Raising the plate and keeping it slightly off center allows more even heating and also protects the glass tray from overheating repeatedly in the center, which can eventually lead to its cracking.

If it still won't cook properly, the magnetron, cooling air flow or power line voltage may be less than it should be.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

The owner's manual is here. On page 10 we find:

COOKING IN ONE STAGE
1. Press the POWER button; the Microwave and High
Cook indicators will light and “PL 10” will light in the
display.
2. Press the POWER button different times to set the
desired power; the display will show the percentage
you chose. If selecting power level 70%-10%, the
Low Cook indicator will light instead of the High
Cook indicator.
3. Press number keys to set the desired cooking time.
OPERATION(CONTINUED)
4. Press the START/+30SEC. button to start cooking;
the Microwave and one of the Cook indicators will
blink and the display will countdown the remaining
cooking time in minutes and seconds. It will beep
five times when cooking is completed.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Strange. I would recommend contacting Sanyo support.

We're happy to help and we appreciate your thoughtful rating of our answer.