Question about Lands Phones

1 Answer

No network connection error 9 message. Can't get it to setup. Saids wait, wait, and so on. No network connetion error 9 message keeps appearing. I have network connection as I'm on the internet at this moment. Nothing has changed with my computer. Had MJ for 1.5 years and never had this type of problem. This is something new.

Posted by on

  • 2 more comments 
  • lepeter1 Jul 23, 2009

    Yes, I recently upgraded to "Lucky You". My operating system is Win Xp.

  • lepeter1 Jul 23, 2009

    ah ha... I understand clearly what you are talking about. What is the specific name of the hotspotshield you are referring to? I check the site and it didn't give me any indication of the software you are mentioning.

  • lepeter1 Jul 23, 2009

    Sorry... I was on the wrong site.

  • lepeter1 Jul 23, 2009

    Mahendra you hit the target dead on. Your evaluation of the problem was identified correctly as well as your solution. Thank you very much for your expediency in attending to my most urgent need. I truly appreciate your top notch professionalism.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,555 Answers

It seems that you have installed "Lucky You" recently. Kindly do let me know this along with your operating system.
Mahendra

Posted on Jul 23, 2009

  • 2 more comments 
  • Aruna Singh
    Aruna Singh Jul 23, 2009

    Why it is happening

    Giving you solution is simple but I'd like you to first know why and how it is happening to you.


    Who is doing


    In your country the ISP which you are using has now opted to block MJs traffic i.e. Now they will never allow you to make calls through your MJ.


    Why and how they are doing


    because due to that their telecon department is going in loss. How they are doing this is simple they are blocking whatever packets are directed towards MJ server.


    Your solution


    Go to www.hotspotshield.com Download, Install, and Run hotspotshield. It works on your desktop and laptop both. When ever you turn on your magicjack just run hotspot sheild at the same time, it will turn green when it's ready and when your magicjack says ''ready to call'' just go to menu on the soft phone screen and restart magicjack.


    What this S/W is doing for you


    This software is directing all your traffic to one particular router. Hence your ISP doesn't blocks anything. From there on it distributes to related servers thats why your MJ works now.




    Mahendra




  • Aruna Singh
    Aruna Singh Jul 23, 2009

    Hope you will like my style of providing complete solution. If it works for you rate me appropriately or else revert back to me for further clarifications any time.

  • Aruna Singh
    Aruna Singh Jul 23, 2009

    simply click on the big Download now button. Its 100% free.

  • Aruna Singh
    Aruna Singh Jul 23, 2009

    this is the web site address again for you http://www.hotspotshield.com/

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Meep will not connet to wifi


Here is the remedy for that error:
We've heard a few reports of Wifi connectivity issues recently, among them 'Authentication error'. If you receive this message, our recommended remedy is to remove all Wifi connection information from your Meep, turn off your Meep, reboot your router, then turn on your Meep and re-add the Wifi information. Follow these steps exactly in this order to resolve this error message:
1. Remove all Wifi network information from the Meep's settings
2. Reboot your router
3. Re-add the Wifi network information to the Meep's settings
4. Reboot the Meep.

Jan 01, 2014 | Oregon Scientific MEEP Kids Tablet

1 Answer

When i try to use Internet with my sony XBR-55HX925 tv, it displays: error de red 1106...Plase, what can I do for solving this problem ? Thank you so much.


Error 1106 is an indication that the Domain Name System (DNS) was unable to resolve. Follow the steps to check the Internet connection:
  1. Check the Network Connection.
    1. Using the supplied remote, press the Home or Menu button.
    2. Select Network Setup .
    3. Select View Network Status .
    4. Select Check Connection .
    If any of the connection settings fail, verify that the TV is properly connected to an active Internet connection.
    Follow these steps, if the error continues to appear:
  2. Unplug the TV and wait 60 seconds.
  3. Power on and off all of the networking equipment, including the modem and router.
  4. Allow the Networking equipment to reset after powering them of and on. Test that the connection is active by using a computer.
  5. If the issue continues, wait and try viewing the content later.

Aug 14, 2011 | Sony KDL46HX800 46 in. 3D LCD TV

1 Answer

What is sony error code 1106. On selecting the internet this error code is displayed. I have done a hard reset of the tv by removing power but this didn't work


Solution proposed by Soufane (member of the Fixya community) :
  • Rank: Wiz
  • Rating: 99.31%, 51 votes

  • Error 1106 is an indication that the Domain Name System (DNS) was unable to resolve. Follow the steps to check the Internet connection:
    1. Check the Network Connection.
      1. Using the supplied remote, press the Home or Menu button.
      2. Select Network Setup .
      3. Select View Network Status .
      4. Select Check Connection .
      If any of the connection settings fail, verify that the TV is properly connected to an active Internet connection.
      Follow these steps, if the error continues to appear:
    2. Unplug the TV and wait 60 seconds.
    3. Power on and off all of the networking equipment, including the modem and router.
    4. Allow the Networking equipment to reset after powering them of and on. Test that the connection is active by using a computer.
    5. If the issue continues, wait and try viewing the content later.

    Jun 20, 2011 | Sony KDL46HX800 46 in. 3D LCD TV

    1 Answer

    What is solution of error oxd05d010d


    Hi

    This error means there is an internal error condition. To resolve this error remove the cartridges from your printer. Now wait for message "Insert the cartridges' to appear on the printer, as soon as the message appears disconnect the power cord from back of the printer. (Restart the printer if message doesn't appear) Now wait for a minute and plug back the power cord, if doesn't turns on itself then press the power button.

    Insert the cartridges and check whether you are still getting the same error. If you are still getting the same error then try pressing # and 9 key simultaneously to reset the printer, wait for a while to let the printer complete the reset.

    Daniel Scott

    Jun 19, 2010 | HP Officejet 5610 All-In-One InkJet...

    1 Answer

    I get the following error message from C5180 printer: 0xc18a0001. What should I do?



    Hi there
    0xc18a0001.
    Try the following steps to remove HP Printer Error Code 0xc18a0001.
    I have put 3 ways for you to try.

    1. Without turning off the printer, unplug the USB cable.
    2. Remove the cartridges.
    3. Wait until the message "Insert cartridge" appears.
    4. Unplug the power cord.
    5. Wait 60 seconds.
    6. Reconnect the power cable. If the printer does not turn on automatically, press "On button".
    7. Reinsert the cartridges and close the lid.
    8. If the printer has a page of calibration accept.
    9. Reconnect the USB cable and remake an impression.
    10. If the problem persists, the machine must be repaired.

    Or try 2

    Turn the printer and wait until you receive the error message.
    * Simultaneously press the keys "9" and "#" printer.
    * While holding the button down, unplug the power cord from the unit.
    * Wait a few seconds.
    * Still holding the button down, reconnect the cable and turn on the printer.
    * Release the buttons.

    Or try 3

    * Turn the printer and wait until you receive the error message.
    * Simultaneously press the keys "9" and "#" printer.
    * While holding the button down, unplug the power cord from the unit.
    * Wait a few seconds.
    * Still holding the button down, reconnect the cable and turn on the printer.
    * Release the buttons.

    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Mar 01, 2010 | HP Photosmart C5180 All-In-One InkJet...

    1 Answer

    HP Photosmart C6280 printer won't print and displays Ink System Failure message and Error #0xc18a0001.



    Hi there
    0xc18a0001.
    Try the following steps to remove HP Printer Error Code 0xc18a0001.
    I have put 3 ways for you to try.

    1. Without turning off the printer, unplug the USB cable.
    2. Remove the cartridges.
    3. Wait until the message "Insert cartridge" appears.
    4. Unplug the power cord.
    5. Wait 60 seconds.
    6. Reconnect the power cable. If the printer does not turn on automatically, press "On button".
    7. Reinsert the cartridges and close the lid.
    8. If the printer has a page of calibration accept.
    9. Reconnect the USB cable and remake an impression.
    10. If the problem persists, the machine must be repaired.

    Or try 2

    Turn the printer and wait until you receive the error message.
    * Simultaneously press the keys "9" and "#" printer.
    * While holding the button down, unplug the power cord from the unit.
    * Wait a few seconds.
    * Still holding the button down, reconnect the cable and turn on the printer.
    * Release the buttons.

    Or try 3

    * Turn the printer and wait until you receive the error message.
    * Simultaneously press the keys "9" and "#" printer.
    * While holding the button down, unplug the power cord from the unit.
    * Wait a few seconds.
    * Still holding the button down, reconnect the cable and turn on the printer.
    * Release the buttons.

    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Feb 10, 2010 | HP Photosmart C6180 All-In-One InkJet...

    2 Answers

    I cant get my LG Neon to send picture messages!


    NO yo have to go to settings and click phone settings then click reset settings and click MASTER SETTINGS and wait while it resets everything and then send a picture to somebody and wait if it works thats what i did to mine and now it WORKS yay.

    Oct 01, 2009 | LG Neon GT365 Cell Phone

    1 Answer

    Power dvd 9 ultra installation error...


    Running Vista?
    Right click on the installation.exe and select "Run as Administrator".

    Jul 12, 2009 | CyberLink Power DVD 5.0 (cd-powerdvd5) for...

    1 Answer

    I hook up my WII to my internet and all I get is error ''52120''


    • Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

    • If you are connecting directly to a modem, try a "Manual Setup" with the Wii console (how to), using your network's IP address, Default Gateway, Subnet Mask, and DNS information. To access these settings:
      1. On your PC, click "Start" and then "Run."
      2. Type "CMD" into the field that appears to open a new window.
      3. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings, including the settings listed above. Input these exactly as they're listed into the "Manual Setup" of the Wii console's internet connection.

    If you are still receiving this error code, please click here for assistance.

    Apr 06, 2009 | Nintendo Video Game Consoles & Games

    1 Answer

    Cannot connet to internet


    Device communication issue! This sometimes occurs fro many reasons mainly FIREWALLS~ In order to keep this from happeninig you should probably setup a static address on your laptop or if your network has a SSID, it needs to be manually set into your adapter because it is not picking up your network. This often happens when you use your laptop in or on other networks. Easy fix, but need answers to these questions!

    Nov 25, 2007 | SMC Barricade g SMC2804WBR Wireless Router

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    1,482 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    yadayada
    yadayada

    Level 3 Expert

    76682 Answers

    Are you a Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...