Question about Computers & Internet

3 Answers

BN 10 crashed. when swirching on now asks to check contrast.Then message "dataerror do you want to view data before resetting ?" Then message "Data error consult your users guide". Then time frames appear and I can use the diary BUT only very slowly or it crashes

Posted by on

  • 2 more comments 
  • michaelbards Jul 22, 2009

    I have no red floppy and never had one. I simply do not understand what or how your solutions can be effected. Please provide more complete details of action steps Thanks Michael

  • michaelbards Jul 23, 2009

    Thank you ! fully understood and accepted. But I never realised that I could print from this old Casio. I have a Hewlett Packard Deskjet F4100 printer which I use with my Packard Bell PC but where can I get the connection to it for the BN10.? What terminal should I ask for ?. regards Michael

  • michaelbards Jul 24, 2009

    Are you sure that the little slot by the DC entry slot cannot take a printer ? The problem is that I have not yet handwritten all my info NOR found a new notebook. I am thinking that the best is an IPOD or IFONE. What think you? The HP products are awful. Finger pressure typing is easier and more reliable than stick typing. I will reset (or dispose of Casio !) when I have transferred info into new notebook.Thanks for your good help I shall use fixya again in the future. Michael

  • michaelbards Jul 24, 2009

    You did all you could and your help was fast and intelligent. But there was nothing more that you cpould do. Thanks. I shall use you again

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

This is the link for your manual if you don't have one: (copy and paste in your address bar)

ftp.casio.co.jp/pub/world_manual/pv/en/pv250x_450x/e_10.pdf

Posted on Jul 24, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Once you see that data error, your system will not accept any more input - you'll need to reset.

Note: this procedure will erase all your data !!! Sorry that your data cannot be saved. But, note step #4.

1. After the Data Error appears, tap YES.
2. After the "Data error consult message", tap OK.
3. The pop up tool screen displays.
4. Now you can enter other modes to recall data. And, print your data.
5. After recalling the data you want, perform the RESET operation "Resetting the PV unit" (which will erase all your data !).
6. Press the RESET button and follow the adjustments.

Hope this helps.

Posted on Jul 22, 2009

  • 1 more comment 
  • NinaE Jul 22, 2009

    Sorry ... #4 should read ... Now you can enter other modes to recall data and make handwritten copies.

  • NinaE Jul 23, 2009

    Sorry, Michael. I was mistaken about printing. I corrected myself in the comment: "Sorry ... #4 should read ... Now you can enter other modes to recall data and make handwritten copies".

    But, did the solution work ??



  • NinaE Jul 24, 2009

    You are welcome, Michael. Glad to help. But, be aware that since there is a port that has the same connection as other devices that connect to printers, that this Casio device can print. By trying to use that port, you may damage your device (that may be OK with you, tho !).

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hello,

Thank You for contacting Fixya.com

Do you have the red floppy disk? when yes,.. on it are two importent files: exths.bin and tattoo.bin -> those files copy on a cd (when you have another pc) [only copy on a cd, when your pb-notebook havent a floppy drive]
then start your pc with the master-cd 1 (if you have from pb)
when the error comes, press ESC to come to DOS back.
when you havent a floppy drive, insert the disc with the 2 .bin files and copy them to c:
Now insert back the master-cd
run following programms:
q:\drivers\tattoo /importbin:c:\tattoo.bin
q:\drivers\exths /importextbin:c:\exths.bin
when both programms tells you DONE.... then restart your pc and boot from the master-cds. type in your serial number from the pb-notebook (when the window came) and done!!!
Good luck and God Bless.

Posted on Jul 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Retrieve deleted voice mails on the iphone


You can retrieve deleted voice mail from your iPhone using an application called iPhone Data Recovery from: http://www.windowspasswordsrecovery.com/iphone-data-recovery/

May 22, 2012 | Apple iPhone (16 GB) Smartphone

1 Answer

No driver


Hi there,
Remove it and install it into another computer as a slave to see what'll happen.
If it shows up in 'my computer' as a drive letter(like E: drive) but you can't access it,you can recover data on it with data recovery program to avoid losing them.
I have succeed with Tenorshare data recovery. It can recover data after deeply scanning your hard drive to look for lost data due to drives crash and 'not recognized' issue.You can get it here: http://www.any-data-recovery.com/index.htm
After you recover your data,you can format it to check out whether it can be fixed.
If the hard drive can't be detected,you can try this way.Put it in a zip-lock bag and put it in the freezer overnight. Then while it's still cold plug it into the computer and you may be able to view it in 'my computer'. And run the recovery program to recover your data on it.
If it fails, you will have to go to a recovery office but let's hope not because it will cost you a lot of money and whether they can recover data is not guaranteed.
This article will help.
How To Recover Lost Data From Crashed Hard Drive?
http://tenorsharedatarecovery.blogspot.com/how-to-recover-lost-data-from-crashed.html

Jun 07, 2011 | Computers & Internet

3 Answers

I forgot my samsung s5200 security password ...how can i creat new one password


here all hard reset of samsung mobile phone . but your samsung reset all data..

*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST

Mar 03, 2011 | Samsung Cell Phones

1 Answer

My Edge 305s GPS is not working. Everything else runs perfectly fine, it just will not acquire any satellites. I tried a soft reset. It won't let me hard reset though.


Edge 205 or 305 often crash, then impossible to power on again.

Here is the way to reset the Garmin edge :

Soft reset : hold mode and lap/reset buttons for 10 seconds
Hard reset : device should be powered down, hold start and mode buttons for 3 seconds then pulse press the lap/reset button.

After soft reset, you need to hold start button for up to 10 secs before it starts.

After hard reset, you will loose all your data, including profiles

Hard reset is not very easy, so follow carefully instructions above.

Now simple advice, did you check in your parameters that the GPS transceiver is turned on ?
There is a mode with GPS off, don't ask why ...
Refer to your manual to find the menu.

Nov 22, 2010 | Garmin Edge 305 GPS Receiver

2 Answers

Hi whilst playing fifa 10 on my ps3 i turned it off and it didn't say it was autosaving, it deleted that file and now i can't save a new file on my fifa 10 and on viewing save files on the system it says...


there might be no space on the memory card, Take the game out and load up the playstation then if the page is full then you have no room left, it happend to me. After that all you have got to do is delete some stuff, if you dont want to then buy another memory card and put it in slot 2.

Feb 01, 2010 | Sony Playstation 3 (PS3) Console

2 Answers

Okay, so I've got a fx-7400G PLUS. My stupid friend put the contrast to light and turn it off. The calculator stop working. What can I do to make it work again? Thanks in advance.


Hi,
Reset the calculator. On the back of the calculator there is a reset button (Above battery compartment and to the left. Use a thin pointed object to push it. The calculator will ask for confirmation to reset all memory back to default. Press [F1] to accept.
And next time avoid hanging out with stupid people, and don't lend them your calculator. Didn't you know that stupidity is contagious?

Hope that helps.
Thank you using FixYa and for rating this solution.


.

Dec 03, 2009 | Casio FX-7400G Plus Calculator

1 Answer

Legend cx


With the unit turned off, press and hold the follow buttons: PAGE + Enter on the click stick. Then press and release the POWER. The unit will power up asking if you want to release all user data. Select yes, and the unit will be reset. After the master reset, place your unit outside, so that it has a clear view of the sky for 25 to 30 minutes for the unit to acquire new almanac data.

Nov 18, 2008 | Garmin eTrex Legend GPS Receiver

3 Answers

JVC EVERIO HYBRID GZ-MG330 Battery error?


I bought a replacement data battery BN-VF-808U from Digicowfish through Amazon.com. (?made by PomerPower).
It fits nciely to my JVC Everio GZ-MG330 which uses a BN-VF808U data battery. However, JVC gives a screen message:Communicating Error.
Now I have solved my Communication Error by using a jumper cable provided with the replacement battery BN-VF808U to connect the attached replacement battery to the camcorder. There is a DC input socket on the camcorder. There is also a DC input socket on the replacement battery for direct connection.


JZC

Aug 06, 2008 | Video Cameras

1 Answer

6630 problem


u need to empty ur phone memory it is full with pics , sounds or other things. if u have deleted ur all data from phone memory and still message appears then u need t o reset ur phone. but before u reset ur phone store ur all contacts numbers and other data from the phone after reset ur phone ur all data will finish. to reset ur phone apply this code *#7370# then ur phone will ask if u sure to reset after select yes it will ask u for security code then fill security code ur phone will restart

Jun 27, 2008 | Nokia 6630 Cellular Phone

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...