Question about Toshiba E-STUDIO 650 Copier

3 Answers

Toshiba e-studio 550 call for service F10

Toshiba e-studio 550 call for service when i do C&8 i get a F10 code

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 57 Answers

Do the following.
Hold down 0+8 and turn the copier on.
Type in 690 then hit start.
Make sure there is the number 2 displayed.
Press enter on the touch screen.
Reboot the machine when told to.

Posted on Oct 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Master
  • 643 Answers

F10 indicates HDD initialization error. What u can do is:

Format the HDD ( 08-690 )
If cannot, then u can proceed to replace the HDD.

*Replacement of HDD require firmware updating.

Posted on Jul 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hello dw357,

I actually solved this issue already and posted the solution on my personal blog for my friends. Here is the url http://theoryreport.com/toshiba-e-studio/, its too much to write. I have gotten about six e-Studio Copiers working so far that had the same f10 error code and two of them were Toshiba e-Studio 650 copiers.

Thank You,
Joe

Posted on Dec 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When turn on machine write 'call service' so I hold 0+8 and 690 but it write report machine waiting then it not work?


U can try this press 0+8 simultaneously put on ur mc then ur mc display will show (add) type 400 start if mc show 5 clear put 0 intrept

Jan 26, 2015 | Toshiba T-6510 Toner Cartridge - Black For...

1 Answer

C41 Error on Toshiba E-Studio 550


Get a decent piece of equipment. WHY would you throw money away on a bad copier?

Apr 15, 2014 | Toshiba E-studio 550 Copier - Fast,...

1 Answer

How removed toner indication still toshiba copier e-studio-181?


toshiba e-studio 181 toner indication patmanent still.

Feb 26, 2012 | Office Equipment & Supplies

1 Answer

Call for service!


hold down 8 and clear and check what the code is the email me at pshopkins@mweb.co.za and i will help you

Feb 14, 2011 | Toshiba E-STUDIO 550 Copier

1 Answer

Hello, I turn on my Toshiba E-Studio 166 Photocopy Machine and it shows an Error Code C 41, please how can I fix this problem?


Poor contact of the fuser drawer connector may cause the following
error codes: C41~C46, C4A, CD5, E01, E03. To correct this issue, a
spacer (see SPL p25 item 1 attached) has been added between the
fuser connector and the frame; also the springs (see SPL p24 item 8
attached) have been changed to provide more tension.
This change has been applied since January 2003 production:
e-Studio 550 TA314824
e-Studio 650 WA312627
e-Studio 810 XA311627
Model P-I Before Change After Change
e-ST550 25-1 --- 6LA14365000
e-ST650 SPACER-DRW-CNCT
e-ST810 24-8 6LA08946000 6LA14468000
SPC067-070-140 SPC068-080-160

Jan 26, 2011 | Toshiba e-Studio163 Copier

4 Answers

I have a Toshiba studio 45 with error code c44, what can I do ?


You should apply to service Toshiba.
The Possible faults in lamp of the heating, thermistor, contact of the elements of fuzer or in signal of the controller of the direct current.


C41 Fuser thermistor, or no heat C43 Fuser thermistor problem or other fuser problem, after machine goes into ready C44 Heater problem

Oct 07, 2009 | Office Equipment & Supplies

2 Answers

Toshiba e-studio 45call for service 254292


Press "clear/stop" and "8". While holding this combination of keys down, an error code will be displayed....what code are you getting?

Sep 15, 2009 | Toshiba e-Studio 45 Black and White Copier

1 Answer

My toshiba e-studio 550: service recommended for SPC appeared


Check the control status of the surface potential sensor (05-242).
<When “4” is displayed: sensor error>
The sensor detection value is abnormal or the sensor output value is not changed even though
the main charger bias value is changed.

Is the connector of the surface potential sensor connected properly?

Is the main charger grid/wire attached poorly?
Is the main charger attached poorly?
Are leaks and such occurring?

Mar 05, 2009 | Toshiba E-STUDIO 550 Copier

2 Answers

Error code c26 on my Toshiba 550 copier


C-26 code it could be your exposure lamp.. when you turn on you copier keep the document feeder open and see if the lamp turns on...if it turns on and the turn off its ok.
Now clean your white reference guide..it's located under the glass..need to take off exposure glass and clean under it..especially a white strip on the edge of the glass.. NOTE: turn of your copier first then clean after adjustment turn on.

May 22, 2008 | Toshiba E-STUDIO 550 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

643 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...