Question about Panasonic PT-47WX49 47" Rear Projection Television

1 Answer

Double Image blue color

Model pt47wx42... double blue to the left of every image. Any suggestions?

thanks

Posted by on

  • 1 more comment 
  • neci0170 Jul 22, 2009

    Is there any kits being sold to fix this problem? If not I will get a tech.

  • neci0170 Jul 22, 2009

    Any suggestions on who i can contact in Bronx, NY to have this fixed?

  • neci0170 Jul 22, 2009

    Before i attempt any repairs... i just have one more question. I tried the convergence... the blue moves everywhere except to the right. Is that still the convergence board that you mentioned? thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 616 Answers

Need to have the convergence board repaired it will require 2 ICs and various resistors, expect to pay around $300 Julio milleniumtvsvc@gmail.com

Posted on Jul 22, 2009

  • Julio Hernandez
    Julio Hernandez Jul 22, 2009

    You can try to get a kit from servicemanuals.vstore.ca good luck Julio milleniumtvsvc@gmail.com

  • Julio Hernandez
    Julio Hernandez Jul 23, 2009

    Just hire a tech, it will get done right and you will get a warranty. Julio

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue Double Image


try another TV,if it is the same situation,the problem is with cables or GPU,if not ,your TV is maybe not compatible,than try with smaller resolution

Mar 07, 2014 | Toshiba Satellite Computers & Internet

1 Answer

THE COLORS SEEM FINE BUT THERE IS A DOUBLE IMAGE. THE TV IS TEN YEARS OLD BUT UNTIL NOW IT WAS IN PERFECT CONDITION. DO YOU THINK IT'S THE ICS OR THE RESISTORS OR THE TUBE. THANKS


Colors fine but double image: does picture have red or blue outlines around lettering or images?


See attached photos, it they look like your trouble it is convergence problem, if not try to give better description of problem.


You can post a comment here and I will assist you-I am here to help.6b564f8.jpg



90d4aa5.jpg

Regards, SD TECH

Aug 23, 2010 | Hitachi 60DX10B 60" Rear Projection...

1 Answer

Samsung HCN4727W Rear Projection TV, green screen, audio works


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai2_bing.gif,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 10, 2009 | Samsung HL-R4667W Rear Projection...

1 Answer

Getting double image in colors


this is a lost of convegence power. first check to see if you have the convergence option in setup menu. if you do not then i suggest you read the fl231 problem in the tips and trick section. otherwise there a good chance u would have to replace convergence power supply board

Mar 18, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Hitachi Mo# 53uwx10ba double image


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 07, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Image double


convergence issues. i see this alot at the shop. i first suggest you read the article i wrote on the fl231 problem in my profile under tips and tricks. this might be a simple inexpensive repair. if this dont apply or help let me know and i see what i can do

Aug 16, 2008 | RCA R52WH73 Projection Television

1 Answer

COLOR OUT OF ALIGNMENT ON LEFT SIDE OF TELEVISION


are you able to adjust the convergence in all 4 directions for both red and blue? If not the Convergence ICs are bad and need replacing. If you ned more info let me know.

Apr 08, 2008 | Televison & Video

1 Answer

Double image 6 your old unit


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 25, 2007 | Hitachi 61UWX10B 61" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...