Question about Panasonic Televison & Video

2 Answers

The color is only blue and green

The color is only blue and gree. How do I adjust the color?

Posted by on

  • susie686 Jul 22, 2009

    Got it closer by adjusting the color bar all the way to red. It's a fairly new TV but the color isn't as it should be.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 188 Answers

Thats not possible ,maybe in the SAM but not in normal mode.

Posted on Jul 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

Dear Sir

plz set monitor side button

prees monitor menu button

recall

seleact button prees

Monitor Autometic Color Set.......

Your Problem Set

Posted on Aug 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Color bleeds


test first a) Video detector, then 2) AGC, adjust control, circuit 3) color Sync 4) color occ 5) color killer 6) color i-f 7)DEM red-gree-blue+videoamp red-gree-blue finally YOKE.see the b.diagram attached.
God bless you
10_18_2012_12_47_27_pm.gif

Oct 17, 2012 | Televison & Video

2 Answers

The color of my television is only blue and red whats the problem


There is a lack of one color.The television is compose of three color.The RED,GREEN,and BLUE. So your television have no green color.Try to adjust the color adjustment,if did not work the problem is in the color section of your television.Maybe the green driver transistor is deffective.Its need to troubleshoot.

Aug 18, 2011 | Televison & Video

1 Answer

Cameras seem to be out of adjustment .getting gree,blue,and red images.not lined up how do i adjust?


There will either be a button on the TV for convergence or you may need to use the TV remote to go into the menu under settings or advanced set up to find the convergence adjustments, they should allow you to move red and blue to try to align to green. If one of the colors won't move it's time for repair.

Feb 28, 2011 | RCA P52945 52" Rear Projection Television

1 Answer

Need color codes for spesker wire for 1993


Good day. The wiring is as follows:

Left front + orange/gree
Left front - black/white
Right front + white/green
Right front - black/white
Left rear + pink/green
Left rear - blue/orange
Right rear + pink/blue
Right rear - green orange

Hope this helps. Good Luck and please rate.

Mar 08, 2010 | Sony Car Audio & Video

1 Answer

Color has suddenly taken on a strong blue gree cast.


The Red could be dead.
Try a different video cable first. If this fixes it, Great.

If not, - get another monitor - see if it does the same thing. If so your Video card is probably bad.

Also, you can plug the green monitor into a different working PC.

Sep 05, 2009 | Computers & Internet

1 Answer

I need the diagram for 1993 honda accord for radio i am installing a jvc cd player and i dont have the right adapter so i cut the origanal plug and now need to know the color codes for the wiring


this the wiring for that car--
constant power-white/green
ignition--white with red
ground-black
dimmer-red/black
left front spk-blue with green-+
left front spk-ghray/black -
right front spk-red/gree-+
'' spk-brown/black-
right rear spk-red/yellow-+
'''''''''''''''''''' spk-brown/white-
left rear spk-blue /yellow-+
'' spk-gray/white -

antenna you done need you antenna is in your window


Jun 25, 2009 | Car Audio & Video

1 Answer

Color adjust


Greetings!

Adjusting the picture tubes is a scary proposition, but since you have already done it...
The easiest way to balance the gray scale is to turn the color all the way down on the set. The next part is easier with two people if the screen controls are on the back of the set. This is the part you saw that has six small knobs on it. There are control for the focus of the red, gree and blue and for the screen level of the red, green and blue. You will want to adjust the screen controls in an effort to get the picture black and white (this is why you turn the color down), hence the term "gray scale". Just make slight adjustments, take your and be patient. It will take some time, but you will get your picture balanced back out in time.

Hope this helps!
Rob

Jan 15, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

No blue just red and green tint


adjust the blue bias on the high voltage block .
it has focus and bias for all three colors

Dec 26, 2008 | Samsung PCL5415RB 54" Rear Projection...

1 Answer

White colors schemes seem off white color or brownish color and blue has green tint or baby blue color. .


Check the coolant in all three crt's as chances are it is contaminated (should be crystal clear). If brown (beer color), replace coolant in all three crt's and perform convergence adjust. Picture should be like new!!!

Good Luck!!!

Jul 20, 2008 | Akai PT5598HD 55" Rear Projection...

2 Answers

Picture is yellow and green


Your missing the red drive on the set. Its most likly the picture tube. Its a possibility that the red drive circuit could be not working so the best thing to do is take off the gree picture tube socket and put the green board on the red tube. Of course do all this when the set is unplugged. if you have no tv experience. its not a good idea to be messing around inside of these sets.

Sep 02, 2006 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...