Question about Mitsubishi WS-55807 TV

1 Answer

Vs-605ic when i hit on button i here a click in back but no power to screen.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers
Re: vs-605ic

Most commonly convergence amps Ic801 and Ic802 and two 5amp pico, F9A04 and F9A05. But you should also check all the low ohm resistors in that circuit feeding the amps.

Posted on Nov 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Mitisubishi 60607 will come on the go right back off

you have a component failure. begin checking the on-board fuses. that should lead you to the circuit that failed. most often it is the convergence circuit. 2nd most is a loss of vertical deflection. this is a tube protection circuit that shuts the set off before it destroys the crt's.

Jan 06, 2010 | Mitsubishi VS-60607 TV

1 Answer

I have a Mitsubishi vs-4543 tv that when powered

check the power supply section.. probably the electronic component got problem.

Jun 04, 2009 | Mitsubishi VS-4544 45" TV

1 Answer

Green power light on but no sound or picture.

When I press the power button it just clicks.... what. ... vs-60603 I will only stay on for a few seconds and then shuts off. ...

Mar 30, 2009 | Mitsubishi VS-45502 45" TV

1 Answer

My VS-60607 won't turn on

there is a fuse blown in the television keeping it from staying on. after the shutdown press and hold the menu and device/input button for about 5 seconds and the led will blink a 2 digit code with a pause in between. the code will repeat itself. 2.2 is the most common and points to the convergence ics and 1 or 2 5a pico fuses. 2.3 is the next most common and points to a fault on the power supply. goodluck.

Feb 05, 2009 | Mitsubishi VS-60607 TV

1 Answer

My VS-60607 won't turn on

unit will power on for a second then shut off. power supply ?

Oct 27, 2008 | Mitsubishi VS-60607 TV

1 Answer

Snowy picture with catv 1 mono on screen

is tv making some.. sound...please tell me..

Oct 20, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

50" Mitsubushi Projection TV --- 12yrs old

your tv needs to be repair hitting on the tv signifies that your tv has an intermittent problem.this means that the circuit board has loose connections resolder your circuit board.if you cannot do it your self have a tech look at your tv to repair it.the repairs will not be expensive.i believe that some parts will have to be replace in the power supply prepare for that.good luck

Aug 04, 2007 | Mitsubishi VS-55707 TV

1 Answer

Powers off by itself

Usually leaky power supply diode and two bad caps-----need service # and chassis # from sticker on back of set .....T.

Jan 22, 2007 | RCA 32V420T 32" TV

1 Answer

TV turns off a second after turning on....

You have a high voltage shutdown problem, look at the threads here on Mitsubishi and you will find your answer.

Dec 09, 2006 | Mitsubishi VS-4543 45" TV

Not finding what you are looking for?
Mitsubishi WS-55807 TV Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

6993 Answers

Are you a Mitsubishi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides