Question about Car Audio & Video

Open Question

I just purchased a used JVC KD-S34 car radio and an aftermarket 16 pin radio harness (China, doen't trust wiring color code), do not have the wiring pin-out diagram for the radio (can't find it anywhere) and do not want to fry the radio hooking it up. I need to know the radio wire assignment (wire #1 is ground, wire #2 is left speaker front,??? etc). Viewed from the rear, the radio has 8 pin-outs across the top or the plug receptor, 1=left end, 8=right end and 8 across the bottom, 9=left end, 16+right end. Any help assigning a source to each pin-out is greatly appreciated. Thanks

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: Before i install my JVC KD-S34 what do i need to play my ipod?

an aux cord that adapts to your i pod.. check radio shack...

Posted on Jan 21, 2009

Ad
etirbynnor
  • 655 Answers

SOURCE: color codes for my jvc arsenal kd-ar560 wire harness

Hello jlj2382,

Here's the wire colors for your KD-AR560:

Black = Ground (to vehicle chassis)
Yellow = Constant 12V (power)
Red = Accessory (to vehicle accessory terminal)
Blue/White = Remote turn-on lead (to remote amp)
Orange/White = Illumination (to vehicle light control switch)
Brown = Cell Phone terminal
White = Left Front Speaker positive (+)
White/Black = Left Front Speaker negative (-)
Gray = Right Front Speaker positive (+)
Gray/Black = Right Front Speaker negative (-)
Green = Left Rear Speaker positive (+)
Green/Black = Left Rear Speaker negative (-)
Violet = Right Rear Speaker positive (+)
Violet/Black = Right Rear Speaker negative (-)

Hope this helps.

Posted on Apr 24, 2009

rteemon
  • 578 Answers

SOURCE: wiring confusion

yellow constant
red switch
black is ground
blue power antenna if any
dimmer i/illumination is optional

front- right-red/green-+
front-left-blue/green-+
rear-right-red/yellow-+
rear-left-blue/yellow-+

these are all the positive side wire for all your spkr


Posted on Jun 25, 2009

evolutioncus
  • 62 Answers

SOURCE: i just purchased front speakers

front left negitive, white with black stripe front left positive, white
front right negitive, grey with black stripe front right positive, grey
I hope this has helped you and please dont forget to rate my solution.
cheers

Posted on Jan 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,Excuseme.I have 16 pin connecter of the JVC KD-S575. But,color of the wires does not match the position of the pin.I want to know the position of the 16 pin connecter of the JVC KD-S575 It has 2...


Car manufacturers donot keep color code. Your best bet is to order a universal adapter. JVC color code can be found in the instruction book. I will attach a picture. upload is not working. email me to jpulickal@gmail.com

Oct 02, 2013 | JVC KD-S570 CD Player

1 Answer

Installing a jvc cd player into a 99 crown vic


the best thing to do is not to cut factory wires and buy a wire harness from walmart or miejer and the wires will be color coted match up and tape them up them plug the two harness's together that is the best way to wire up a aftermarket radio

Sep 24, 2012 | JVC USB/CD Receiver with Dual AUX Input...

1 Answer

JVC radio operation instructions for model kd-S34


JVC has the manuals on their support site: http://books.jvc.com/booklist.asp?Model=KD-S34 . The direct link to the installation guide is: http://books.jvc.com/Download/138327414/GET0518-002A.pdf . The operating instructions are here: http://books.jvc.com/Download/138327414/GET0518-001A.pdf . If you want to buy a printed copy, see http://store.jvc.com/product.asp?Model=KD-S34 . Note you will need a program like Adobe Reader to read the files.

I hope this helps.

Cindy Wells

Oct 03, 2011 | Car Audio & Video

1 Answer

Just installed a JVC KD-S16 radio into a 2001 kia spectra. Everytime the car is turned off the radio stations reset and so does the clock in the car. I used the wire harness. But I think it has something...


There is a constant power wire and a power wire that is actuated when you turn the car on. sounds like you may have them reversed.
You can check the pamphlet that came with your radio to see what the Jvc color code is for your hot's.
Double check them with the wire color code on the harness.

May 18, 2010 | Car Audio & Video

1 Answer

Installing a cd player in a 1992 honda accord


The harness looks like what is depicted on this link: http://cgi.ebay.com/JVC--16-PIN-WIRE-HARNESS-FOR-CD-PLAYER-BLACK-BRAND-NEW_W0QQitemZ370214069143QQcmdZViewItemQQimsxZ20090612?IMSfp=TL090612198008r8862
This connector fits the following JVC Car Radio/CD/MP3 Players with 16 pin connection.
All wires are labeled.

Hope this helps....................sodeep

Jul 26, 2009 | JVC KD-G220 CD Player

1 Answer

Need color codes for new radio to 99 nissan sentra


Hello jmartinatl,

The color codes for your receiver is here.

Just match the function of each wire the the appropriate wire on your vehicle. Or better yet, purchase a vehicle specific aftermarket wiring harness that plugs into the vehicle wiring.

Hope this helps.

Jul 24, 2009 | JVC KD-G200 CD Player

2 Answers

I NEED A WIRING GIAGRAM BECAUSE THEIRE IS NO COLOR TO COLOR PATTERN ON BACK OF MY JVC-KD-G320


This may help your cause

http://www.nodevice.com/manual/JVC/page24.html

Jun 11, 2009 | JVC KD-G320 CD Player

1 Answer

Connect jvc kd-lh1150 in elantra 2001... different connector


Hello claude_bouth,You need a vehicle specific aftermarket connector generally called a "wiring harness". Your JVC came with a plug that fits the back of the receiver with "pigtail" wires which you splice to the harness wires. http://www.SonicElectronix.com sells the Metra 70-7301 which appears to be the correct harness for your Elantra.You can tap into the wiring of the car harness and splice the wires by function into the appropriate car wires, but using the aftermarket vehicle specific wiring harness is a lot easier and you don't need to disturb the vehicle wiring in any way, just plug into it. It also makes it possible to re-install the factory radio if you ever need to do so. If you choose to tap and splice, you can find your Elantra's wiring color code at http://www.modifiedlife.com.Hope this helps.

Jun 05, 2009 | JVC Arsenal KD-LH1150 CD Player

1 Answer

Wiring my jvc kd-g331 to a 1996 vauxhall corsa


You can go to a place that installs car stereos and purchase a universal wiring harness for your car that will cost about $15 and allow you to do the wiring very easy without the need to know what every wire is for. This harness would be wired to the harness you got from JVC for your new radio and all you need to do is to match the colors of the JVC harness to the same colors of the universal harness that would then just plug right into the factory wiring harness for your car and then the other end plugs into the connector for your JVC radio. It is very easy and insures that you have all the proper wires connected to operate your radio and have full functions available for use.

If you require to know what each wire from the JVC harness is for, just ask.

I would be happy to offer you more help if you need it, just reply to this post and I will get back to you as soon as I am able.

If you found this free information to be useful a FixYa! rating would be appropiate and very much appreciated. After all, it is the only reward we get for helping people like yourself for free.

Thanks and good luck with your radio installation,

Dave

Sep 04, 2008 | JVC Car Audio & Video

1 Answer

Installing a new car radio


if you have a wiring harness al the wires are color coded to match the after market radios colors. the yellow constant wire goes to 12 volt or battery wire. the accessory wire would be the red wire that is the switched 12 volts. the remote is for the factory amp or an aftermarket amp which turns on and off it would be the blue with white wire.

May 28, 2008 | JVC KD-SX990 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4875 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...