Question about Kenmore Elite 45986 Front Load Washer

1 Answer

I have a kenmore Elite front loading washer and yesterday during a load it made a terrible noise and when the washer was opened two of the fins inside the stainless steel tub had fallen off and now when the drum is moved at all it makes a horrible noise. This is the second time since January when we installed the washer that we have had to get the repair man to come visit. I was wondering if anyone else had this problem happen and what was done about it??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

U will need 2 replace all the baffles .remove top when this done on top of tub u will see a plug removethis . if u notice on the new baffle there is a place for a screw, that screw hole can b acessed through the hole in the top. the factory never puts these screws in the noise I dont know about. haundi24

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hit the delay button for 2 hours yesterday on my kenmore elite front loading washing machine and nothing has happened and the door is locked


unplug it and wait for the machine to reset. You should hear some clicking noises. May take a while for it to reset.

Jun 28, 2014 | Kenmore Elite HE5t Washer

1 Answer

Kenmore Elite front-loading washer


What the heck it this garbage about washers

Feb 11, 2014 | managemylife.com

1 Answer

My Kenmore Elite He4t front load washer is making a terrible noise when it starts spinning the clothes. What could be wrong?


Sounds like the rear bearing. If you hear the noise when you manually spin the drum or if the drum has any movement when you lift up on it then you need major repairs

Feb 27, 2011 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite HE3t 11042922200 Front Loading. F02 drain Problem


We experienced the same thing. I was able to restart and locate the noise to the water pump. After disassembling the water pump found the impeller shaft sliding out. For some reason this shaft will not stay in place. Had to order a complete pump assembly as the electric motor is not available.

Jan 15, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Terrible smell during washing cycle!


I am not a repair professional. I am just a 78 year old
man who has been making his own repairs for about
50 years. Therefore the washer ID doesn't mean
much to me. It's been about 55 years since I had
experience with front load washers. However I can
suggest you go to www.applianceaid.com where
they have very good trouble shooting and repair
information on front loaders. I think you'll find what
you need there. Good luck with it.

Nov 27, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

I'm getting an F26 code on a Kenmore Elite he5t front load washer


DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!!

Oct 31, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Elite 73952 will not start


sounds like it is the motor, open the door and press the door switch in ,have another person push the start button,and you tunr one of the drun fins. IF itstarts, you need a motor

Mar 11, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite front load washer filling up while turned off


sounds like a bad water inlet valve stuck open and permitting watertto enter even though not on, untill you replace the valve turn off water between uses part number 8181694

Oct 30, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite clicking noise


This may sound basic and I'm not trying to be a wise guy, but is there any metal objects in the washer, like a pair of jeans with metal buttons? This could be the clicking that you hear.

Sep 09, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Clanking noise during spin cycle


I was told by 3 technicians that my washer had shot bearings and this is a common problem for the Kenmore Elite Front loader.

Sears knows it and will not do anything about it except try to sell you a new washer since it costs $800 to replace the unit with the bearings.

Jan 02, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...