Question about Mitsubishi VS-55705 55" Rear Projection Television

1 Answer

1985 front projection mitsubishi

It seems everything comes on but i have no picture

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: 1985 front projection mitsubishi

There is a PIP board in this set that has to be replaced or jumped out. If you have soldering and printed circuit board experience, doing this should be no big deal for you. But if you do not, have someone experience do it for you.Good Luck

Posted on Nov 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Does the front panal around the screen of my Mitsubishi VS-50707 come off for cleaning behind it?

Yes, front screen can be removed to clean projection mirror and picture tubes lenses.
Remove speaker grille, pull them to remove.
There are 3 screws at bottom of front screen, remove them. There are few wire harness plugs need to be disconnect to remove completely front screen.
Below exploded view of Mitsubishi VS-50607 will help you to remove front screen to clean inside. Be careful while removing screen.


Oct 23, 2009 | Mitsubishi Projection Televisions

5 Answers

Problems with mitsubishi WD 65737 tv is locked. what do we do?

problem with mitsubishi wd65737. thought the bulb was bad, bought a new bulb replaced it and now the screen doesnt want to come on. light on the front of the tv turns green, you have sound but no picture then the tv turns off the light on the front is now steady red. resetting the sytem worked yesterday but not today.

Oct 20, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Audio is working, no picture

you have either a defcetive signal pwb, FMT pwb or light engine. Does the menus appear clear when you press menu?

May 20, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Do have power and sound, do not have picture

this unit has a self test check you can do

when the set shuts down or when the set is turend off.
press and hold , onthe front of the set the input or device button, and hold the menue button for bbout 5 seconds.
the set will flash a 2 digit blink code at you.
12 blik = no problem
21 blink = xray protect
22 blink = short protect
23 blink = loss of deflection.


Jan 15, 2009 | Mitsubishi WS-55411 55" Rear Projection...

1 Answer

Distorted picture,After power loss

Replace both STKs covergence chips 392-56or 570s use same STK numbers.

Dec 12, 2008 | Mitsubishi VS-50805 50" Rear Projection...

1 Answer

No picture just sound

Your projection tubes are messed up. It's a very expensive fix, just get a working TV off craigslist with a smashed screen and reuse your screen itself (usually 100-200$) or just toss the TV and upgrade to an LCD

Apr 29, 2008 | Mitsubishi VS-6043 60" Rear Projection...

1 Answer

TV powers up green light is solid and no picture

>>The first thing to do is a system reset using the recessed button on the front panel.
>>If that does not work, unplug the set and let it sit overnight
SYSTEM RESET button with a pointed item like the end point of a paperclip.

Jan 27, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-55705 55" Rear Projection Television Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66685 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides