Was there a discovery of an Egyptian Citadel in the Grand Canyon in the early 1900s ?

vacuum motor or electronic module ?

something for a land rover service division workshop to fix

Dual air. The actuator is bad. It is between the fire wall and HVAC plenum. The dash has to be removed along with the plenum. Costly job at the garage.

some alarms / immobiliser systems can be reset by using a scanner (code reader ) Try that first.

Flagstaff , Arizona, USA, Earth

First let me admit that I haven't worked on a LandRover in years, so I highly recommend that you contact someone that has recent experience.

That being said; it sounds like a throw out bearing failure to me. Although it could be a pressre plate issue, it really doesn't matter since I always recommend that the pressure plate, throw out bearing and clutch plate be replaced at the same time, since a failure of one is an indication the others life span is coming to the end.

Sorry I couldn't be of more help, but my LandRover experience was mainly in the 80s and early 90s

You can download the owners manual for your 2004 GMC Canyon from the following link.(http://www.extendedgmwarranty.com/owners-manual/gmc/2004-GMC-Canyon.pdf ).Your valuable feedback would be appreciated.Thanks for choosing Fixya.

TinuAlbinAlex

the haynes manual sold at advanced auto or auto zone would give a full diagram of fuse location

My 01 Grand Prix GT did the same thing, The cat, converter was bad,

there is no reset for the light, the light is there for when your charging system is not working properly. you need to have your altinator checked, that will cause the battery light to come on

I have a 05 grand and also have the same problem. Its the lights in the cluster itself there burnt out. I found it out when i open the control itself. Hope it answers you problem.