Question about Fisher Ovens

1 Answer

Fisher double oven OD302. Periodically it will start beeping, shut off with no default code

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher Master
  • 5,323 Answers

Oven keeps beeping:
As there is no reprogramming of most control boards try this, disconnect the power and wait 30 seconds and then reconnecting the power.

If it's an "F1" fault code this generally implies an electronic oven control (EOC) failure. Disconnect the power, wait 30 seconds or longer and then reapply power. If "F1" returns upon power-up, replace the electronic oven control.
The oven control can be accessed and replaced from the rear of the control panel.

NOTE:Disconnect the power cord from the power source before removing the panel from behind the console.
If its an F2 ERROR CODE, The F2 error indicates an open circuit in the oven temperature probe.

Your range has a resettable thermostat in series with the oven temperature probe. If this thermostat opens the clock will display F2 and the oven won't heat.
You can reset the thermostat by pushing in the reset button on top of the thermostat.
Some ovens have an alarm that will beep continuously every six seconds to alert you that the oven is still on. Usually, a kitchen timer that you have set will cause the beeping, but occasionally it can be an error with the oven's settings. If it is the kitchen timer, you can simply push the "Kitchen Timer On/Off" button to end the continuous beeping. If that does not stop the beeping, it is probably beeping due to an error. You can turn the continuous beeping off but you may still need to troubleshoot the issue that is causing the beeping noise.

Read more :

http://www.ehow.com/how_12086370_ge-oven-stop-beeping.html


How to Get GE Oven to Stop Beeping eHow

Posted on Jan 11, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher Paykel OD302 double wall oven. Exhaust fan assembly (vent fan) wiring.


get an electrician in to fix it
the red wire is normally the active (power wire) and the blue is the neutral wire
if you fit the blue to a red terminal then you could be dead, blow the circuit or blow a circuit breaker
be safe call an electrician

Dec 05, 2016 | Fisher and Paykel Ovens

1 Answer

Sets the Clock of the oven


why bother the main oven switch should be off every night anyway which turns the clock

Jun 18, 2014 | Fisher and Paykel AeroTech Double OD302...

1 Answer

Bottom oven not heating. Both light and fan are working.


If fan is working o/k then it is usually the oven element that is faulty, this should be located at the rear of the oven compartment behind a removeable cover.

Dec 11, 2010 | Fisher and Paykel AeroTech Double OD302...

2 Answers

Error code f5, and inconsistent heating in top oven.


You need to replace the temperature sensor in the top oven cavity. I can't get you a part number or price because I can't find any service info without exact model number. Contact your local appliance parts store. It is easily replaceable with just a coupla' hand tools.

Dec 04, 2010 | Fisher and Paykel AeroTech Double OD302...

2 Answers

I have a Fisher & Paykel double wall oven that I purchased in 2005. The top oven which was used most often stopped heating up to temperature in normal time. What used to take 5 minutes to get up to 250...


Google searches report that after running the self cleaning cycle this can happen. I am experiencing this issue with my Fisher&Paykel AeroTech Double OD302 but with the BOTTOM oven. I'm concerned as Thanksgiving is coming up and I need this baby working!

Nov 08, 2010 | Fisher and Paykel AeroTech Double OD302...

1 Answer

Fisher Paykel oven model OS302M error code F7?


Check your lock on the oven for the door. It may be sticking out a bit:)

Oct 01, 2010 | Fisher and Paykel AeroTech Double OD302...

1 Answer

Our Fisher Paykel OS302 completly overheated during its cleaning cycle. Oven door is locked, nothing comes on and Fisher Paykel will not help, it is only 4 years old, we have made many calls, and certified...


The thermostats have probably blown. There is a rebuild kit for this problem, it is not cheap nor is the labor to do it. Try shutting off the breaker for a few minutes... sometimes it will reset, but not heat. In any event you should have the new thermostat kit installed. F/P should at least be able to give you the tele. of a Tech., keep in mind that depending on where you live there are very few technicians that are certified to fix these.

Jul 08, 2009 | Fisher and Paykel AeroTech Double OD302...

Not finding what you are looking for?
Ovens Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Ovens Experts

Dennis Boxerman

Level 3 Expert

1266 Answers

ray gallant

Level 3 Expert

53376 Answers

Bill Boyd

Level 3 Expert

53720 Answers

Are you a Fisher Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...