I have a Sanyo TV Model #DP50842 50 screen black no sound no picture/I took back off of TV fuse intact bought multimeter/How do I use it to check all components on panels

TEVION 42" FLAT SCREEN LCD TV MODEL LCD4203ID

www.ebay.co.uk/.../TEVION-42...TV-MODEL-LCD4203ID-/1213...

eBayTEVION 42" FLAT SCREEN LCD TV MODEL LCD4203ID in Sound & Vision, Televisions ' eBay.Missing: white

main board for tevion lcd4203id 42" lcd tv mhdv4201 ... - eBay

www.ebay.co.uk > ... > Other TV & Home Audio Accs.

eBayMAIN BOARD FOR TEVION LCD4203ID 42" LCD TV MHDV4201-ZC01-01 (B) ... Mouse over image to zoom .... *Please open the back cover of TV then check the part number of screen, it would be on white label at back of screen ... of actual item in yourTV as well as check either if it is compatible with your TV model.

LCD TV Repair made easy # 1 - YouTube

? 7:38
https://www.youtube.com/watch?v=GryA_Zl4EBk
Aug 27, 2009 - Uploaded by Grants Pass TV Repair
I have a 2008 model Sanyo dp42848 42' lcd tv with ccfl lighting. .... bought a Seiki tv and within 1 month ...

LG 42LC2D 42 in. LCD HDTV Fusing unit - Que

Have a look at link .Type in your model to see if a service manual is available.
https://www.manualsparadise.com/MainSearch.do?brand=312&model=15a&elementChanged=Find&registerButton.x=34&registerButton.y=4

More likley a capacitor on the power supply blew out. This would be obvious if you diasembled the Tv and checked all the circuit boards.

This could be a faulty back light lamp.It is located right at the back of the screen It is an cold cathode lamp supplied by a high voltage from inverter board .Inverter board has a input voltage of 24 volts inverted into 300 volts AC this lamp lights up the screen...
You need to open the back cover to check the lamp.....

I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT [email protected]

I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT [email protected]

WOW we bought 2 of those tv,s..... 1 from sears and and had lines through the centre.. took it back and went to future shop and bought the same. within hours of turning it then off and back on the tv would not work. woud act like the remote was being used and it was on the table. took it back and bought a sanyo... no more problems...

overheat is likely

but check the internal fuse

i have the same problem but i have 11 blinks

MINE TOO AND SANYO TOOK THIS TV OFF ITS SUPPORT WE SHOULD ALL SUE THIS COMPANY [email protected]