Question about Star Logic 17" LCD Monitor
My 19" starlogic is now showing "no signal" I hooked another monitor up and it works. is this a common problem, I've seen 2 other people who had this happen. any idea what fixes it?
If you are getting a "No Signal" message, someone may have inadvertantly pressed the wrong button on the monitor. Use up arrow of button #5 below to cycle through RGB (normal VGA connection) and DVI sources. Down arrow will result in "No Signal" message.
There are five buttons at the bottom of the screen on this monitor. From the left:
1 - sound volume
2 - degausser
3 - power on/off
4 - monitor set-up
5 - RGB/DVI source
Posted on Jul 02, 2010
It won't run on certain resolutions. Change your resolution on another monitor and hook it up to the starlogic. Something like 1440x900 works fine
Posted on Dec 20, 2008
I need help with my starlogic 19 in monitor does any one have the driver...
Posted on Oct 01, 2008
CURRENLY MY LCD MONITOR FROM STARLOGIC SHOWS DISCONNECTOR MESSAGE? wHAT IS THE PROBLEM...
Posted on Jan 15, 2008
This sounds like a Driver problem in which the starlogic monitor didn't come with a parsay "plug and play" feature. Try to search online for a driver for this type of monitor. If your monitor came with a disk, which it should've, take a look on it and check to see if it installs a driver for you.
Posted on Sep 17, 2008
Tips for a great answer:
Jan 16, 2011 | Star Logic 17" LCD Monitor
May 22, 2010 | Star Logic 17" LCD Monitor
May 18, 2010 | Computer Monitors
Sep 11, 2009 | Computer Monitors
Sep 07, 2009 | Star Logic 17" LCD Monitor
Feb 05, 2009 | Star Logic 17" LCD Monitor
Apr 11, 2008 | Computer Monitors
Nov 07, 2007 | Star Logic 17" LCD Monitor
753 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: