Where is the code button on p-touch 1880 - Brother P-Touch PT-1880 Printer

You may download a copy of the manual here.

please service the printer

To change the Font Size follow as below.

Press the 'Fn' Button

Then using the '' Buttons move to SIZE and press the 'OK' Button

Then again using the '' Buttons select which Font Size you require (Large, Medium, Small or Max) and press the 'OK' Button.

This is for pixma ip1800: canon inkjet pixma drivers And this is for pixma ip 1880 pixma ip 1880 drivers You'll need to select the operating system. Good luck. Thanks for using FixYa.

Go to this website to get the security code: http://www.nfader.su/

Be ready with your phone's IMEI number

Here is the manual: http://www.fixya.com/support/p170037-brother_p_touch_1180_label_printer/manual-2457

By pressing function button (Fn) and the number 1, you will get the choice between Large, Medium, Small and Max.
Also, you can press Fn, tap the left or right array until you get "Size" in the display, and then press OK to enter the size menu.

I need a battery for MDP 1880

You can buy a new one by clicking on the hyperlink:
buy replacement ac adapter power charger cord for MINTEK MDP-1880 MDP1880

This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.
vulmec.wordpress.com