Question about OKI C5500n Laser Printer

Open Question

231:Fatal Error 03 - OKI C5500n Laser Printer

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: OKi C5800ldn 231: fatal error 03

I have the Oki 5650 which had been great for about 18 months. Then found that the C cartridge was showing error as 'not installed'. After much fiddling about with it and checking on the internet I can now rectify this by either pushing down on the top of the printer while it boots up, or removing the small chip on the left top of the toner (make sure you have 'earthed' yourself to prevent any static damaging the chip when you handle it!) and taping securly onto the top of the cartridge above the chips proper slot. This now has been working OK for 6 months. Strange how this only affects the C cartridge (which has also been replaced and had the same problem). I suspect that the printers RFID chip reader for the C cartridge is having problems reading the chip and moving the chip closer to the reader by either taping to the cartridge top of puching on the top cover while printer boots up resolves the problem (for now anyway!) This can also trigger the 'service call 231 fatal error 03' message which also disappears if you follow the above procedure.
Hope this helps you.

Posted on Jul 27, 2010

sinclair_cum
  • 38 Answers

SOURCE: SERVICE CALL 231: FATAL ERROR 03

THE RFID READER IS NOT CONNECTED CHECK CONNECTER TO THE LED'S AND TO THE BOARD AT THE BACK OF THE MACHINE

Posted on Dec 12, 2011

sinclair_cum
  • 38 Answers

SOURCE: 231 Fatal Error 03 means what

communication error between
the RFID reader and the Tag
chip... THATS THE CHIP IN THE TONER CARTRIDGE

Posted on Dec 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does this message mean: 231 Fatal error 03


During a 3 minute unplug, carefully check ALL sensors, latches and doors for misalignment or damage. Replug.
Call service.

Feb 03, 2015 | Oki Electric Industry C8600n Led Printer

1 Answer

Fatal error 231 error 3


RFID Reader I/F Error An interface error was detected
with the RFID reader device.
01: communication error between
the RFID reader and the engine
PCB.
02: the transceiver circuit error of
the RFID reader.
03: communication error between
the RFID reader and the Tag
chip.
04: the RFID Tag detection error

Jul 17, 2014 | OKI C6100n Laser Printer

1 Answer

How can I fix oki c3530 231: fatal error 03?


RFID Reader I/F Error An interface error was detected
with the RFID reader device.
01: communication error between
the RFID reader and the engine
PCB.
02: the transceiver circuit error of
the RFID reader.
03: communication error between
the RFID reader and the Tag
chip.
04: the RFID Tag detection error

Jun 21, 2014 | OKI C5800Ldn Led Printer

1 Answer

Oki


231 means RFID reader I/F error. 03 means Communication error
between the RFID reader and the tag chip. The remedial measure is to check for normal connection of the antenna cable.

May 06, 2014 | Oki Electric Industry C830DTN Laser...

1 Answer

OKI C5650 231 FATAL ERROR 03


I tried putting 1.5mm of plastic foam under the RFID chip to raise it up in the toner cartridge. This seemed to work.

Jan 17, 2012 | Office Equipment & Supplies

1 Answer

SERVICE CALL 231: FATAL ERROR 03


THE RFID READER IS NOT CONNECTED CHECK CONNECTER TO THE LED'S AND TO THE BOARD AT THE BACK OF THE MACHINE

Jan 10, 2011 | OKI C5500n Laser Printer

1 Answer

Fatal error 231 on oki c5800 after changing toner, tried power off/on still doesn't work


From the service manual, doesn't look good.
A technicain will have to look at the printer.

RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01 : communication error between the RFID reader and the engine PCB.
02 : the transceiver circuit error of the RFID reader.
03 : communication error between the RFID reader and the Tag chip.
04 : the RFID Tag detection error (more than 4 chips).
If rebooting the machine does not improve the symptom, you need to
check the device.

Mar 08, 2010 | OKI C5800Ldn Led Printer

1 Answer

231 Fatal Error 03 means what


communication error between
the RFID reader and the Tag
chip... THATS THE CHIP IN THE TONER CARTRIDGE

Jan 10, 2010 | OKI C5500n Laser Printer

1 Answer

Fatal error message says ''231: fatal error 03''


It doesn't sound good, but a trick to try is to unplug the printer to see if that reset the board.

Nov 24, 2009 | OKI C5500n Printer

6 Answers

OKi C5800ldn 231: fatal error 03


I have the Oki 5650 which had been great for about 18 months. Then found that the C cartridge was showing error as 'not installed'. After much fiddling about with it and checking on the internet I can now rectify this by either pushing down on the top of the printer while it boots up, or removing the small chip on the left top of the toner (make sure you have 'earthed' yourself to prevent any static damaging the chip when you handle it!) and taping securly onto the top of the cartridge above the chips proper slot. This now has been working OK for 6 months. Strange how this only affects the C cartridge (which has also been replaced and had the same problem). I suspect that the printers RFID chip reader for the C cartridge is having problems reading the chip and moving the chip closer to the reader by either taping to the cartridge top of puching on the top cover while printer boots up resolves the problem (for now anyway!) This can also trigger the 'service call 231 fatal error 03' message which also disappears if you follow the above procedure.
Hope this helps you.

Feb 13, 2009 | OKI C5800Ldn Led Printer

Not finding what you are looking for?
OKI C5500n Laser Printer Logo

Related Topics:

1,699 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...