Question about RCA 25414RE3 Corded Phone

Open Question

Annoying beep noise for person on HOLD

RCA ViSys 4 line phone has a annoying beep while someone is on hold. Help please. Can I change it or stop it?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: ge fourline telephone 29488GE2-A

The phone generates a low beep tone about once every 10 seconds for the person on hold. This lets them know that they were not hung up on but at the same time it is not needed if you have music like a typical office puts on the holding lines. I talked with the manufacturer and they told me that this feature can not be disabled through programming. There is however a on-hold aftermarket adapter that can be placed in front of the music system that will eliminate the tone (Invotel AudioImage SX4400EZ). The cost we paid for this device was about $200 which has a audio input and in/out plugs for all 4 lines. This aftermarket system is designed to replace the beeps with music you provide through the audio input.

Posted on Dec 29, 2009

  • 1 Answer

SOURCE: RCA 4 line phone

Hi Richman,

If you have more than one phone line which I assume that you do -if one party has not completely hung up the handset after putting someone on hold when you pick it up on your end you will hear that beeping noise that you are talking about. Have them pick back up the line while you are on it and replace the handset again on thier phone to disconnect completely.

I hope this helps (trial and error)
Thanks

Posted on Jan 29, 2008

  • 2 Answers

SOURCE: RCA 25205 Visys will not record message

Called the company. There is a misprint in the instructions.

In the section titled "Out-Going Announcement RECORD" on last step it says Press Exit to stop recording. It should have said Press Sel/Save.

I did this and it worked.

Repeat for Line 2 if you are doing both lines.

Next thing is to make sure you go right to the section titled "Configure Out-Going Announcement" and select the right type of message you want callers to hear for each line.

Worked like a charm and took 3 seconds to get 2 different personal messages on the machine.

Posted on Oct 21, 2008

  • 2 Answers

SOURCE: Crosstalk problems with RCA Visys 25424RE1-A

Unplug phone that has crosstalk problem.Replace with a good phone.If trouble disappears then trouble is the replaced phone.If trouble is still there,then it is wiring problem.

Posted on Jul 13, 2010

  • 1 Answer

SOURCE: RCA ViSYS phone says "replace battery" but it doesn't have one

There is a battery box that holds 4 AAA batteries. It's down under. Not easy tospot but it's there. However, I added fresh batteries and it stil says replace battery. I'd like ot know how to turn off the message.

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to setup voice mail on a RCA ViSYS 2-Line Phone (25255RE2), and i cannot figure it out.


RCA ViSYS 2-Line Phone (25255RE2)

Here's the manual for your 2-line phone:
http://www.rca4business.com/products/pc/pdf/instruction-book/25255RE2.pdf

refer to pages 40-43 of your manual for "Answering System Operation."

To enable your Answering System, press and hold the "ans sys" button for 2 seconds.
The "ans sys" button indicator will flash.

To disable your Answering System, press and hold the same button for 2 seconds.
The "ans sys" button indicator will go off.

May 16, 2011 | RCA ViSYS 2-Line Speakerphone

1 Answer

HOW DO I TURN OFF THE ANSWERING MACHINE FOR THE RCA VISYS MODEL 5RE1A..?????


Briefly press the Answer L1 or L2 button, it displays the answering status on LCD. For example, L1: ANSWER OFF.

To change the status, press and hold the Answer L1. Unit will display and announce the new status of the answering system.

Nov 02, 2010 | RCA ViSYS 2-Line Speakerphone

1 Answer

How do I record a message in my rca visys phone to be played when someone calls in?


Melissa is correct about the manual being wrong. You have to press the Sel/Save button, not the Exit button after recording a personal message. Then you have to follow the directions on page 23 to Configure each line to Personal Message.

Aug 12, 2010 | RCA ViSYS 2-Line Speakerphone

1 Answer

RCA ViSYS phone says "replace battery" but it doesn't have one


There is a battery box that holds 4 AAA batteries. It's down under. Not easy tospot but it's there. However, I added fresh batteries and it stil says replace battery. I'd like ot know how to turn off the message.

Feb 03, 2010 | RCA ViSYS 2-Line Speakerphone

1 Answer

Ge fourline telephone 29488GE2-A There are annoying loud beeps on other lines when one line is on hold. How do I get rid of it? You cannot talk on the lines until someone picks up the call that is placed...


The phone generates a low beep tone about once every 10 seconds for the person on hold. This lets them know that they were not hung up on but at the same time it is not needed if you have music like a typical office puts on the holding lines. I talked with the manufacturer and they told me that this feature can not be disabled through programming. There is however a on-hold aftermarket adapter that can be placed in front of the music system that will eliminate the tone (Invotel AudioImage SX4400EZ). The cost we paid for this device was about $200 which has a audio input and in/out plugs for all 4 lines. This aftermarket system is designed to replace the beeps with music you provide through the audio input.

Nov 18, 2009 | GE 29488GE2 Corded Phone

1 Answer

Crosstalk problems with RCA Visys 25424RE1-A


Unplug phone that has crosstalk problem.Replace with a good phone.If trouble disappears then trouble is the replaced phone.If trouble is still there,then it is wiring problem.

Sep 15, 2009 | RCA 25423RE1 Phone

2 Answers

Very annoying beep when finished programme


When the machine is on, but not running, press and hold the "pre-wash" button. After a few seconds it will begin that beep noise, keep holding it in until the beep volume goes down and finally stops completely (5-10 secs). Once the beep has stopped, release the button and voila, no more annoying beeps at the end of your cycle.

To restore the end of cycle notification (beep) do the same thing as described above, but release the button earlier while the beep is still going.

Nov 23, 2008 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Reset password for KX-T7000 Panasonic phone?


How can I get that annoying beeping to stop when i put someone on hold using that same KX-T7000?

Feb 27, 2008 | Lands Phones

2 Answers

RCA 4 line phone


Hi Richman,

If you have more than one phone line which I assume that you do -if one party has not completely hung up the handset after putting someone on hold when you pick it up on your end you will hear that beeping noise that you are talking about. Have them pick back up the line while you are on it and replace the handset again on thier phone to disconnect completely.

I hope this helps (trial and error)
Thanks

Oct 04, 2007 | GE 29488GE2 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Are you a RCA Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...