Question about Canon imageRUNNER 400S Copier

4 Answers

E805 error in canon ir 400 - Canon imageRUNNER 400S Copier

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 86 Answers

E805 error code means failure of one of the many fans inside the copier. If there is not a dash with four numbers after the 805 code on the display, it is one of two fans - FM1 the transport bed fan or FM9 - the reversing fan just below the fuser assy. There are several checks that can be done but a too lengthy to be described. A tech maybe the best answer depending on your mechanical ability.

Posted on Jul 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

E805 Error code details Fan rotation error


The clock signal is absent for 5 sec or more after the fan drive signal has been generated. The detail codes of the fans in question are as follows:
0001 developing fan (FM1)
0002 fixing fan (FM2)
0003 curl reducing fan (FM4)
0004 curl reducing fan (FM5)
0005 electrical unit fan (FM3)

Main cause
 The fan wiring is faulty (short circuit, open circuit). The fan is faulty. The DC controller PCB is faulty.

Action
1. Foreign matter
 Is there foreign matter that prevents the rotation of the fan?
 YES: Remove the foreign matter.
2. Wiring, Connector
 Are the wiring and connector of the fan normal? 3. Fan, DC controller PCB
 Try replacing the fan. Is the problem corrected?
 YES: End.
 NO: Replace the DC controller PCB.

Posted on Sep 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

In which position fan FM5 is placed

Posted on Sep 01, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My coppier is not accepting the dram

Posted on Jun 23, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: canon ir 400 photocopier

i have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help

Posted on Aug 16, 2010

  • 149 Answers

SOURCE: MY CANON COPIER IR2016 HAS FUNCTIONAL ERROR E805...

there could be a problem with the main fan and or the dc controller could be bad.

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error e805 ir 400


my cannon ir400 xerox machine is on but no working power supply is full but not run machine

Dec 21, 2013 | Canon imageRUNNER 400S Copier

1 Answer

Ir 400 error 805 002


Your connector is not good is connected to the DC control board. That connector is J112, which is located in top 3 of left to write.

Jun 12, 2012 | Canon imageRUNNER 400S Copier

2 Answers

CANON GP405 ERROR E014 PROBLEM


sir i have ir 400 photocopir machin than problem is e803,e805 than coad plese give me soulison...............

Jan 06, 2012 | Canon imageRUNNER 400S Copier

2 Answers

Canon xerox ir 400 error E805 the problame is machin display open the front door


This problem due to your composite power supply,you can see 3 blue capasitor has burned,change it with 4 amp fuse near that caps

Sep 07, 2011 | Canon imageRUNNER 400S Copier

1 Answer

Canon ir 3100 cn E805 003


E805 fan error
Description

With the ITB fan in operation, the machine does not detect a lock state for 5 sec continuously.
Remedy
Turn off the main power, and check the DC controller PCB; then, turn the power back on.
Remarks
Disconnected fan connector; absence of lock signal because of fault in fan.

Nov 09, 2010 | Canon Office Equipment & Supplies

1 Answer

E805,E803,E002 Error Problem


hi sir my xerox machine ir 400 the error code e0110 so now please help me

Sep 24, 2010 | Canon imageRUNNER 400S Copier

2 Answers

System Error E805 in Canon iR2018


E805 is Fan failure
The fan is faulty. - Check the fan connector.
- Replace the fan.

Jan 08, 2010 | Office Equipment & Supplies

4 Answers

Canon ir 400 photocopier


i have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help

Jun 03, 2009 | Canon imageRUNNER 400S Copier

1 Answer

Close the front door and second problem is E805


805 is a bad fan usually one of the three on the exit door

Dec 10, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Canon imageRUNNER 400S Copier Logo

4,734 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1919 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...