Question about Remote Controls

Open Question

Aifa remote code

I have a aifa remote (L6) that was operating a teac tv/video unit it was playing up and i took the batteries out before realising it is a programable - now cant reprogram it dont know how

Posted by on

1 Suggested Answer

  • 1694 Answers

SOURCE: codes ................................T.

Posted on Mar 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

I trying to see if my skandia universal remote is compatible with my TEAC TV/DVD combo model no LCDV26555HD. Please help:)

one of those codes should work. Make sure the TV is ON when you do the steps.

Press the desired Device Mode Key (e.g. TV).3. Hold down "
CH +
" and "
" on the URC simultaneously for 2 seconds
until the indicator light under the power key lights up.
4. Use the number keys "
" - "
" to enter your 4-digit Device Code. The
indicator should go out immediately

Dec 27, 2014 | Universal Remote Controls

1 Answer

I need the programming codes for TEAC Dolby HX Pro. I have a Sony Remote Commander which can access up to 8 components, but I don't have the instruction book containg the codes. I don't really need the...

First to clarify: are you programming the Sony Remote Commander to operate the TEAC? The AIR-RM10 (S-AIR Remote Commander) only operates Altus S-AIR transmitters and receivers. The code needs to be physically set in the battery compartment to have the units working on the same frequency. Then you pair or couple the devices (so there is no remote code involved). Other Sony device remotes only operate Sony brand products. Would you please clarify which remote you have? I'll be glad to check if your devices can be paired with more information.

Manuals (and codes where applicable) are available for most Sony products here: . You will need the model number of the Remote Commander to find your manual.

Note: the codes programmed into most remotes are limited to those for devices released at least 6 months before the remote was programmed. If your remote is older than the TEAC Dolby HX Pro, you may need a newer remote (or a different remote).

Please write back and I'll give you as much help as I can.

Cindy Wells

Mar 06, 2011 | Teac Remote Controls

2 Answers

I have a audiosonic kgr1 remote and need the set up instructions and teac tv codes

You're in luck - try each of these 4 digit codes for TEAC TV:
1627 1085 1152 1154 1165 1168 1171 1181 1183 1193 1283

Nov 30, 2009 | Remote Controls

1 Answer

Need to pair my universal remote with my tv


Dec 11, 2008 | Remote Controls

1 Answer

Codes ................................T.

Mar 21, 2008 | Directed 434MHZ Remote Control

1 Answer

Toshiba CT-852

A universal remote would cure this problem. It's generally since they are on the same system or IR codes are similar. There isnt much you can do to fix that problem unless you have a seperate universal remote to opperate seperately.

May 05, 2007 | Toshiba CT-90157 Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66330 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides