Question about Dell W4201C 42 in. Plasma HDTV

2 Answers

I get sound from my dell , but no picture , dell logo dosent appear on start up either

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 51 Answers

Y SUS and Buffers are usual culprit.
You can get it from guy at
plasmatech@gmail.com
He has everything for Dell TVs!!

Posted on Aug 28, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you recently install a new video card? If so it could be competing with the onboard video.

If you have 2 video ports on your tower, you may be plugged into the wrong one.

Be sure your monitor is plugged into the wall and turned on and that the connection to the computer is connected securely as well.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My motherboard is dell GX260 when I trun on my computer it make 6 beeps what problem has my motherboar?


Starting the Dell Diagnostics From Your Hard Drive
  1. Shut down and restart the computer.

  2. When the DELL™ logo appears, press <F12> immediately.

note.gif NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities CD.

If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the Start menu and try again.

  1. When the boot device list appears, highlight Boot to Utility Partition and press <Enter>.

  2. When the Dell Diagnostics Main Menu appears, select the test you want to run.

Oct 28, 2010 | Dell OptiPlex GX260 PC Desktop

1 Answer

Yeah so about 3 weeks ago, my Dell D600 which is running XP Professional SP3, 2gb ram, an internal bluetooth, and using a usb wireless adapter, started to freeze at completly spontanious times. Everything...


Hi Chad,

It sounds like it could be 1 of 2 issues either the memory or your hard drive may be failing.

Please do the following:

Turn on the computer. When the DELL logo appears, press immediately. If you wait too long and the Microsoft Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again.

When the boot device list appears, highlight Diagnostics and press .

Please choose the express test and post the results.

Sep 15, 2010 | Dell Latitude D600 Notebook

1 Answer

I have 5 Dell 4310 WX projecors and I would like to display my logo when they start-up. Can this be done with the projector only or is a laptop necessary for this to happen?


I believe the Dell logo is hard-coded for the Startup, but you can change the Wallpaper form the Dell logo, to an image of your choice:

From the Setup Menu, or Others Menu, you can go into:
SCREEN SETTINGS—Select and press checkmark to activate screen settings. The screen
settings menu consists of the following options:

CAPTURE SCREEN—Select and press checkmark to capture the screen display, the following message appears on the screen.

NOTE: To capture a full image, ensure the input signal that is connected to the projector is 1280 x 800 resolution.

SCREEN—Select Dell to use the Dell logo as wallpaper. Select Captured to set the captured image as wallpaper.

RESET—Select and press to delete the captured picture and set back to the default setting.

More information available on the Manual here: http://support.dell.com/support/edocs/acc/4310WX/en/ug/pdf/4310WX_en.pdf

Jan 14, 2010 | Compaq Presario M2000 Notebook

1 Answer

Laptop dosent log in


Hi,
Shut down and restart,your computer . At the Dell logo screen, tap on the F8 key slowly a couple of times. Using your up or down arrow key select safe mode and hit enter. Hit enter again. You would see a adminstrator account , login using the same.

1. click start
2. Control panel>user account
3. Change the password of your account and restart your computer.

Thanks for using fixya
proton

Nov 09, 2009 | Dell Latitude D510 Notebook

1 Answer

Hey, My Dell Optiplex GX270 will run for a quick second, beep, and then a light with a barrel looking icon lights for a second too. How do I fix this? Thanks so much!


I would run diagnostics. Here's how you do it if the utility partition exists on your hard drive:

Starting the Dell Diagnostics From Your Hard Drive
  1. Shut down and restart the computer.

  2. When the DELL™ logo appears, press <F12> immediately.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities CD.
If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the Start menu and try again.
  1. When the boot device list appears, highlight Boot to Utility Partition and press <Enter>.

  2. When the Dell Diagnostics Main Menu appears, select the test you want to run.

Aug 11, 2009 | Dell Optiplex GX270

1 Answer

Dell w4201c hdtv plasma tv BLACK SCREEN, LOGO FADES OUT, SOUND REMIANS, HELPPPPPPP


the problem was the y-sus board, i had a local tv repair shop diagnos that much for me. although, he couldn't fix it i did some research and found a company in california, itritek.com, who could. you send him the y-sus board and the two buffer boards and he not only repairs them but he upgrades them. apparently the y-sus board gets too much heat and eventually goes out, sometimes the buffer boards are affected too. itritek.com replaces the components on the y-sus board with better parts which are more heat resistent. i believe this will help you with your problem. let me know...good luck.

Jul 12, 2008 | Dell W4201C 42 in. Plasma HDTV

1 Answer

Sound but No Picture


Perhaps your remote is set to video recorder?  Try that first, and if no response, try calling up a menu on your TV and look for the Picture Settings.
Good Luck.

Nov 03, 2007 | LG 37LP1D 37 in. LCD Television

Not finding what you are looking for?
Dell W4201C 42 in. Plasma HDTV Logo

Related Topics:

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

gwix50

Level 1 Expert

16 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...