Just bought jane powertwin oro and having trouble putting car seat on front, the existing seat when i fold it down to accomodate car seat seems too bulky, what is the correct way of doing this? thanks :)

Jane PowerTwin Tandem Sun Cover - Stroller Not Included


Other than that, they stopped making this partucular stroller, you might try to find a visor that is comperable.

Here's a free website to download the manual, it might help!

hi here you go

http://www.johnstonprams.co.uk/catalogue/productfiles/5152X-H59/Powertwin%20Pro%20instruction%20manual%20-%20IM-01025,03.pdf

i had one of these about 5 years ago, you need a set of carseat adaptors that plug in somewhere near the canopy attatchment,possibly they go in where the canopy does( you can't use at the same time)
the seat needs to be laid back so flat if you want car seat on back or if on front you need to push seat forward instead .
hope this helps if not go to jane website and download instructions for use.

Hi,

If you visit this link:
http://www.jane.es/index.php?fuseaction=manuals
You will find the instrcution manual.

Also, if you visit this link:
http://www.youtube.com/results?search_query=how+to+fold+a+Jane+Powertwin&search_type=&aq=f
You will find a video showing you how to fold this.

I hope this helps.

The front seat on the Powertwin does not turn. It only reclines by lifting the handle in the seat back. I rear facing Jane Rebel car seat can be fitted in place of the front seat using special adapters

You need to push it together at the same time that you are pulling up on the unlock part. It took me a few weeks to really get it down. If possible, try using the rear end of your car as a stop for the front of the stroller. Disengage the locks at the handlebars and at the same time press your weight into the stroller against the car. I promise it'll get easier over time.

there is a small metal handle behind each seat, pull it up while you move the seat into the recline position you want - rear seat has four positions, front seat has two. :) Jan.

I normaly Scrub the seats down with some stain remover and hot water on a sunny day, or ona day when it is dry. Then leave them to dry, and they come up pretty good.They only detach from the pram as a full seat so not able to put in a washer.

There is a winged nut behind the platform. It is very fiddly to reach and you need to undo it almost fully to move the platform and even then it only moves a little. Is best if you can manage without adjusting this regularly.

This is exactly what my husband did to our powertwin just 6wks into using it he managed to twist it slightly back into position and it holds so we have just put up with it but my god was I pissed at him! I was told it could be repaired by replacing the seat unit by a local pram shop but this seemed expensive we have managed with it like this for a yr no problems hope this helps.