I need to get the dimensions of my Amana Microwave RSBG659P

Take off the cover to expose the fuse holders. one of them is bad.

you must ask to the supplier for the dimension and based in the models specifications. Contact them via ONLINE chat and get the support for better performance.
God bless you

This model is not producing heat, everything else is working, but not heating up anything.

Sounds like the "start" button has worn out. Sorry to say the keyboard parts for this model are no longer available. Part number is AP4247481.
If you or someone you know are very clever at fixing things you could probably put in a different press button (press to make switch) or even possibly fix the keypad, but these days the recommended answer is to get a new machine, sorry. Or find a used one.
Note that the capacitor inside the case can hold enough charge to be hazardous to life under some circumstances so don't open it up if you don't know what not to touch! Not worth the risk.
I wish you good luck finding one you like :)

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

56ik

We would need the full model number to tell you the dimensions. You'll need to post a new info request with model number.

If an oven is arcing, it's almost always grease and/or food particles on or behind the waveguide cover, turntable coupler, or elsewhere inside. A good cleaning is usually all it takes.

Try appliancerepair.com. I've had good luck there. You can also cruise the web with a google search of 'amana ald10t microwave parts', and look at the websites offered for what you need.
Best regards, --W/D--

See page 24 of the owner's manual here:



We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Well one would presume you could simply measure the bracket and the microwave, and ask a retailer for the dimensions of units with similar dimensions.

They may also have this bracket and be able to compare the sizes before purchasing your new one.

Not knowing the dimensions of either the bracket itself or the microwave, this would be the only solution i can think of.

Your owner's manual (see link below) suggests unplugging it for a few minutes then trying again. F6 is usually a problem in the controller / circuit board. If it still has the error message, it needs to be serviced. To find the Amana authorized servicer in your area, contact your local distributor or contact the Amana ComServ Support Center at 866-426-2621 or [email protected]. Owner's Manual: http://edge.maytag.com/AmanaCommercial/12695301.pdf I appreciate your rating of this answer. Good luck!