Question about Cooktops
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I realize this is over a year old. I have the same unit with the same error code. Last night, mine made a popping noise followed by smoke and then displayed the 41 and all E's. I pulled the breaker immediately. I'm sure that at least one controller board is toast.
I called Sears and it is under warranty but for parts only, so I guess I will give them a call and schedule the repairman. This should be fun.
Anyone else experienced this failure??
Posted on Jul 16, 2010
my induction ceramic cooktop is showing an error code E6 on two of the elements...what is the problem and how do I get it fixed
Posted on Dec 21, 2010
To exit showroom mode the cooktop must be locked by pressing and holding the key symbol for five seconds. After the cooktop is locked, press and hold the melt touch pad for five seconds.
Posted on Dec 26, 2010
SOURCE: I have an induction cooktop
I have this error too. E95 is an indication that one phase of your electricity wrong. I checked my input voltage. Tested OK. I took my stove apart and found a blown 20A fuse on the induction module. I replaced the fuse and the stove turned on OK. The three regular burners turned hot (they only use one phase). So far so good. Then I turned on my induction burners. I heard a clicking sound and then was back at E95 where I started. So something is blowing the fuse. If I can get the part, I will next replace the Filter Board on the induction module. Good Luck, and be careful.
Posted on Jan 11, 2012
Tips for a great answer:
Jul 29, 2015 | Kenmore 30" Electric Induction Cooktop...
Feb 18, 2015 | Cooktops
Good Afternoon friend, I appreciate your inquiry!
Typically on an Electrolux induction cooktop the "E4" error code stands for key sensor for timer. Which means you could be experiencing an issue with the right board, center board, or left board. I would perform a reset on your cooktop and you can do that by flipping the household circuit breaker off for ten minutes.
If that does not assist with clearing any false error codes or the error "E4" continues to display I would suggest seeking assistance from a professional for proper diagnosis and repair. Hopefully this helps. -Matt
Oct 18, 2014 | Electrolux 36" Electric Hybrid Induction...
Nov 29, 2013 | Kenmore Cooktops
May 27, 2013 | Max Burton 6015 Portable Induction Cooktop...
Aug 07, 2012 | Electrolux 30" Electric Hybrid...
Aug 21, 2011 | AEG 23 in. 6410KF-N Electric Cooktop
Jul 27, 2011 | Electrolux 36" Electric Hybrid Induction...
Dec 15, 2009 | Cooktops
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: