Question about Sewing Machines

Open Question

{Euro pro Shark 473 sewing machine} Replacement bobbins.

Class 15 is the size in plastic or metal. I recommend the metal ones as they last longer for this machine.

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 32 Answers

SOURCE: I have a Shark Euro Pro sewing machine. Thread

Sound as if your tension is to tight. you have to play with it to get it adjusted, be patient.

Posted on Aug 08, 2009

  • 3741 Answers

SOURCE: bobbin cover plate

click this link directly. ------------- this is direct link for the service will have to enter the model number and place the order.this will help you.

Posted on Sep 16, 2009

  • 1116 Answers

SOURCE: I have lost my manual, can I get a replacement?

I found a manual for Shark Euro Pro at this site -

Posted on Apr 20, 2010

Testimonial: "I have been searching for several weeks for a manual for a Euro-Pro model 473 sewing machine. Thank you so much."

  • 6 Answers

SOURCE: I need to buy a replacement foot for my shark euro...

e mail to or call them at 845-694-4961 and leave a massage

Posted on Jun 14, 2010

  • 1 Answer

SOURCE: I purchase a 473 Shark Euro pro sewing machine. I

need a site to download the manual for the euro pro 473 machine ty

Posted on Feb 04, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What size bobbin holder and bobbin is used with a shark 361

Bobbin Case Class 15 JO1313ZW

It is a Euro Pro Sharp 361 machine. Ask at the local sewing machine repair service.

Oct 24, 2016 | Sewing Machines

1 Answer

Shark Euro Pro 473: The needle won't go up and down when I press the pedal. Power is on, light too and machine running but no action. Any suggestions other than rethreading everything? Thanks!

Is the bobbin winder engaged? The smaller handle inside the balance wheel, the large handle. If the bobbin winder is engaged the thread will only wind around the bobbin and the needle does not move.

May 29, 2015 | Sewing Machines

1 Answer

Spool pin 473

check with,, they have a phone number on their site, so you can call them about the part you need.

Aug 12, 2013 | Euro-Pro Sewing Machines

1 Answer

I purchase a 473 Shark Euro pro sewing machine. I need a manual ASAP. Where can I download one?

need a site to download the manual for the euro pro 473 machine ty

Nov 30, 2010 | Euro-Pro 473

2 Answers

I can not find supplies, especially bobbins for my Shark Euro Pro sewing maching model # 7133. Can you help me? Target does not carry supplies but sells the machines

Hi. This machine takes regular class 15 bobbins found in stores like Wal-mart. You can use metal or plastic. However, metal is preferred. You can use any press on attachments made be singer on this machine.

Apr 07, 2010 | Euro-Pro Shark 80 - 7133

1 Answer

Needle will not pick up bobbin threat

Try flipping the bobbin spool so the thread comes off in the other direction.
Forcing means that the needle has been jammed against the sewing plate ant the needle is now out of timing with the bobbin pickup.

May 31, 2009 | Euro-Pro 473

2 Answers

Shark 9110 won't thread bobbin

The same thing just happened to me, but I am miising a piece that fell off. Make sure there is a little metal wire piece on .the bobbin winder, if not that is your problem

Jul 23, 2008 | Euro-Pro 9120 Computerized Sewing Machine

1 Answer

Won't catch bobbin thread

In order to see whether or not my euro-pro 9110 had a timing issue, the service rep had me change out the needle (making sure I was using anything but a Singer brand needle--they do not work in these machines). I re-threaded the needle, took out the bobbin casing and the plastic ring encasing the bobbin, then lowered the needle to see if the hook on the metal ring holding the bobbin actually catches the thread on its own. If it doesn't catch, it's a timing issue and needs repair. They can walk you through this process of troubleshooting and set up repair if need. Call Eruo-Pro's customer service center for sewing machine service and repair at 800-798-7395

Apr 17, 2008 | Euro-Pro 8260 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Chris Wetmore

Level 2 Expert

185 Answers


Level 3 Expert

78237 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides