Question about Drills

Open Question

How do you drill through porcelain tile? - Drills

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair holes in two high gloss porcelain floor tiles


You should be able to buy a tube of ceramic filler from a hardware store which will do the job.

Aug 19, 2014 | Microwave Ovens

Tip

Tips on how to Get ready the Subfloor intended for Ceramic Tile Installs


Ceramic along with porcelain tile are generally among the most rigid supplies intended for floors. They require the subfloor that's which will take into account that, without any fluctuation and also motion. If ceramic and also porcelain tiles are generally set up on the wrinkled surface area, a person manage the risk connected with allowing the tiles to be able to break and also loosen. Locations recommendations on tips on how to get ready the subfloor for a tile assembly.
one. The installation of ceramic tile along with porcelain tile with a real piece

Repair many splits along with wrinkled pads from the real subfloor before the assembly - specifically crucial in the event the tile will be becoming specifically bonded to the real.
If connected with subfloors along with great splits, look at the chance of removing a large portion of real piece along with replacing that using a brand-new one as an alternative to patching all the splits.
Intended for negative splits from the real piece, smooth that along with real filler, and also related substance.
In the event the real subfloor will be brand-new, that have to be still left to be able to treatment 29 days and nights previous to tiling.
Personal hygiene will be paramount. Aside from virtually any surface area supplies, you'll want to take away virtually any grease intrinsic and extrinsic stains, and also alternative contents that have tarnished the piece because most effective it is possible to.
Bare cement backer snowboard can offer powerful, flat working surface to put in tiles on for those who have the real wood subfloor.

only two. The installation of ceramic tile along with porcelain tile with a plywood subfloor

The plywood subfloor have to be structurally seem along with capable to help support the assembly. Tile floors are generally hefty along with tile is a very difficult substance. It is going to bust and also dislodge in the event the surface area bends less than the fill.
Don't forget which you are required an extremely flat working surface to be effective on. If desired, stone dust the plywood into level the subfloor.
Plywood have to be set up over an acceptable subfloor along with have to be a minimum of one 1/8? heavy if put together with the subfloor. Interior-grade plywood along with particleboard are not deemed strong sufficient for a tile assembly.

three. The installation of ceramic tile along with porcelain tile over plastic floors

Non-cushioned plastic along with linoleum which is structurally seem along with unencumbered with high motion can certainly take action just as one suitable subfloor.
Padded plastic seriously isn't the perfect subfloor. You need to take away the plastic ground along with virtually any remnant adhesive utilised to the plastic assembly.
In some instances, it is possible to eliminate the plastic once more, however , not the adhesive. Use the skinny placed which is endorsed from the backer snowboard maker.
If it seems hard, you might want to lay out the backer snowboard along with thinset.

several. The installation of ceramic tile along with porcelain tile over a pre-existing tile ground

It is possible to sometimes keep the tile ground set up along with employ thinset specifically over that, and also take away the tile using a hammer, dependant upon the best way high the ground must sit down relative to be able to doors and also other internal factors.
In the event the current tile ground is focused with a mortar mattress, it really is very difficult to eliminate the tiles with no removing beautiful mortar mattress.
If you're the installation of specifically on the older tile floors, uncertain " up " the existing tile along with stone dust document. Clean using a degreaser along with analyze a little community suddenly intended for bonding.
In addition, test the height from the ground while using height of doors along with showcases. Any good thinset enable you to set up the brand-new ground.

Incorrect to order subfloors

Subfloors in order to avoid intended for tile installs are generally those that are inclined to bend, increase, contract, and also warp. Virtually any high motion may loosen the tile along with soda the grout. Incorrect to order subfloors have to be succeeded and also taken care of using a suitable underlayment. Here's a list of no-go subfloors:

Padded plastic
Border set up plastic
One layered plywood
Flake snowboard
Particleboard
Computer chip snowboard
Hard wood (strip) floors
Luan plywood
OSB planks
Masonite
Linen steel


Which kind of subfloor considering the installation of the ceramic tile on?


Continue to searching for the ideal tile to your renovation venture? Please click here to be able to consider the amazing group ceramic along with porcelain tile.
Wholesale Ceramic Tile from China Manufacturer Best price

on Jul 31, 2015 | Building Materials

1 Answer

Where and who manufactures these porcelain tiles


Takla. Tile 1 877 631-2845
email..sales@Taklatile.com

Aug 22, 2013 | Takla Full Body Porcelain Tile - Earth...

1 Answer

Cutting porcelain tile with wet saw and it breaks at the end of the cut?


Porcelain tile has to be cut painstakingly slow, especially the last inch or two to prevent the splitting problem you are having. When you are cutting tile, the sawblade rides up just a little as the tile is being fed into it. You'll notice it if you stop pushing the tile through and watch the head drop down just a bit. When you are getting to the last part of the cut, reduce the pressure you are using to push the tile into the blade so the blade can wear away the tile with little pressure and vibration as possible.

Dec 30, 2012 | Mk Diamond MK 370 TILE SAW

1 Answer

Is there someone (a professional) who will accept porcelain plates to drill to make a 2 or 3 tiered serving piece? Preferably on the east coast (near Philadelphia?)


You can do it your self stay away from the cordless drills get a carbide drill bit and a tube fill it with some water so it covers the peice of porcelain you want the hole in. Ihave know idia what a 2 or 3 tiered serving piece is. But if its made out of porcelain but if you have a high speed drill and bit and you can keep the peice cool you can drill perfect holes in it. It may take some time if the hole is 1/2 inch or more depending on how thick the meteral is put a peice of wood under the peice so you don't drill through the bottom of the tube. But small holes 1/4of an inch are much quicker to do. I dought you can find anyone else to do this for you And it sounds vary artsy but this how its done with tile and you can drill perfect holes in porcelain just go slow and steady and keep it under water at all times. good luck

Jan 02, 2011 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Adhesive for granite tiles on kitchen counter?


Mortar, go to a tile supply store and ask for the best tile mortar for granite.

Glue is fast and easy but pails in performance to that of mortar.

Jan 03, 2010 | RTO 5/16" X 4" Long Groo V Tip Granite,...

Not finding what you are looking for?
Drills Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Brad Brown

Level 3 Expert

16026 Answers

Are you a Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...