Hi, Ineed 5 speed Peerless transmisson for a troy

Hi, Your Troy-Bilt has a sealed for life transaxle and requires no service. However, there have been some issues with the CVT clutch assembly bushings. Since there are no lubrication points, if the unit will not reach top speed or changes speeds abruptly, the first thing to inspect is the drive belt wear and tensioners. If the belt is in good condition then the bushings, and/or the clutch assembly will need to be replaced. I hope this helps and feel free to reply back if you need further assistance. Here is a link to the transaxle and clutch assembly;

Troy Bilt 13AX60TG766 Troy Bilt Super Bronco Lawn Tractor 2006 Drive...

Troy Bilt Deck belt Replacement - YouTube

? 11:46
www.youtube.com/watch?v=w3SrErGTyoY

Apr 1, 2014 - Uploaded by Murray Mayhem
I got a good one troy bilt bronco having problems finding the right deck belt for it. I use the model number under the seat but they are too long ..

Troy Bilt TB2450 Manuals

Service

Hydrostatic Transmission Fluid

NORMALLY THERE IS A KNOB OR LEAVER FOR YOUR PARKING BRAKE AND IS CONNECTED TO THAT PEDAL BRAKE TO LOCK IT UP FOR PARKING, THROUGH A SERIES OF RODS CHECK THOSE RODS IF STILL ATTACH TOGETHER, PRETTY SURE THAT IS THE PROBLEM, GOOD LUCK

Here is a link.....

Troy Bilt 13AN77KS066 Troy Bilt Pony Lawn Tractor 2013 Wiring Schematic...

normally they work by spring lock system, follow the bar under the hood or engine and check if any broken or missing spring or parts often bended by running over things

Hi,

You will find the diagram on the left side of the deck as you sit on tractor by left foot. It will be located under the foot pedal that has the routing diagram specifically for your Troy-Bilt mower model. Note that owner's manuals may not have the most current schematic.

Also you can check this link to download the diagram:-

http://www.seapyramid.net/rt/belt-diagram-troy-bilt-riding-lawnmower/

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

how do you install a drive belt on a 46 inch garden way troy bilt riding mower

We I disengage the blade belt always comes off its to loose I have had the number checked they say its the right belt but its so sloppy

If you check the speed spring lever on your carb you may find it might be stuck . Try wiggling the little springs or rods that goes to the carb. Could even be dirt stuck in some place that will not let them work when working the gas pedal. I have had to free several engines up that way.