Question about Washing Machines

1 Answer

White magic 1 2 3 700 h 6th sense problem after wash water not draining from machine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 5,323 Answers

Washer will not drain:

Thedrain water pumpis the main part in your washing machine that pumps out the water. If this is defective or has failed in any way, this will be the reason why your washer will not drain the water. Before you order a new drain pump, make sure tocheck the pump to be sure a small object like clothing or similar has not lodged itself insideof it causing the NO DRAIN issue and even a no spin issue?. If the drain pump is not clogged, you can test it with a multimeter and remove and replace if needed. Go to Google or YouTube and search for "Replace Washing Machine Drain Pump" then type your brand and model number of washer to show you details on replacement.

Read more:http://removeandreplace.com/2014/10/30/fix-washing-machine-that-wont-drain-washer-not-draining-water/#ixzz3X2LbXMWJ

The washing machinedrain hoseis where the water flows through to get the water out.If this drain hose is blocked, kinked, bent, or clogged, the washer will NOT be able to remove the waterfrom the tub. Check the drain hose to be sure it allows the water to flow freely. You can take the drain hose off and run water through it in your sink to be sure it is not blocked. If there is water STILL in the washer when you remove the drain hose, grab a bucket as the water will exit from where you disconnected it
Thewater pump belt(to drain out the water) may have broke or become frayed or loose.If this belt breaks then it is unable to drain and remove the water from your washer. Inspect the belt to see if this is causing theNO DRAINissue and remove and replace if needed.

If thelid switchis not working as required it will cause your washer to not drain (and many other problems).This may be unlikely as a bad lid switch will usually cause your washer to alsonot agitate or spin.However on some models this can vary. The best thing to do if you have a suspected bad lid switch is to test it. It can fail electrically and or mechanically. If mechanical failure is the issue, you should be able to see if it is cracked, broken, or not in place to make contact with the lid. To test it electrically, use a multimeter set on Ohms and test it for continuityMy advice is free cuz God is good!



Fix Washing Machine That Won Drain Washer Not Draining Water

Posted on Jan 13, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when it says PE on my lg wm0642hw washing machine


The PE error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water level pressure switch. As the machine fills, the pressure increases on the switch, at the set pressure, the switch cuts power to the water inlet valve and the water stops flowing into the washer. If the pressure switch fails to sense properly, or the water inlet valve fails to shut off the unit can overfill. This situation can also be caused if the machine does not drain properly. First, check to see if water ever enters the machine when it is turned off. If so, replace the water inlet valve. Next, check the drain line to be sure it's not clogged or kinked. Next, check to see if the drain pump is working properly and removing the water from the previous cycle. If all of those check out, you may need to replace the pressure switch.

Jul 29, 2016 | LG 4.0 cu. ft. Front Load Washer, White -...

1 Answer

My washer is leaking water


Frigidaire washing machine leaking water from bottom

www.washingpoll.xyz/frigidaire-washing-machine-leaking-water-from-b...
I on the middle hard non porous ( keep girl does washing machine front you ...Detergent liquid reviews drain new combo amana washes click. ... Drum sensor cleanedfilter years of rash bad skin pull disconnected washer dry rings magic left.

Dec 30, 2015 | Washing Machines

1 Answer

Whirlpool whitemagic pro 700h


The model no is Whirpool whitemagic pro 700H fully automatic top load

Dec 19, 2013 | Washing Machines

1 Answer

My whilpool white magic pro 700h is not storing water in the tank.it is draining.


Go to whirlpool website, in the service and support section you can get a copy of your manual. All the error codes should be listed.

Apr 03, 2013 | Pool & Spa

1 Answer

Whirlpool front loader duet hd washer gets stuck in the wash cycle with the error code of F02. What is F02 mean?


Whirlpool Duet front-load washer F02 usually means it is taking over 8 minutes for the washer to sense that the rinse or wash water has drained, which either means that the drain/filter is clogged or the pressure switch/tube is clogged (causing both the washer to over-fill with water and not sensing that water has drained).

To clear out the drain/filter, tilt the washer backwards a little for easier to the kick-plate and support the front bottom with a wood block or similar, remove the front kick-plate's (3) retaining screws and swing the kick-plate up out of the way. The filter drain is behind the white knob in the center, be prepared with something to catch any remaining water and lots of towels to soak up any spills, and turn the knob counter-clockwise to remove the filter.

Jan 11, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My dishwasher will not fill with water. it sits there for a bit, then the pump kicks on and starts washing with no water in the machine.


Your dish washer may have a number of problems that may cause the water inlet/outlet problems:-

1 The water level or water presuer indicator may be blocked or not sensing due to deposits on it. Check it out and clean it and/or replace it

2 The water inlet solenoid may not be operating, check out and replace

3 The programmer is the most likely cause but is the most expensive to replace as they are not repairable. this is where it sensing the drum id full of water and has completed a cycle then puts the pump on to drain out?

Hope this is useful help Regards Mike

Jul 08, 2011 | Magic Chef Dishwashers

2 Answers

Washer won't drain.


My washer fills up with water and goes thru the wash cycle but when it's time to drain, it just sits there and clicks.

Oct 17, 2009 | Tecnik TKL9260 Front Load Washer

2 Answers

My danby fills and immediately drains.


Hi, It sounds like the drain hose has dropped lower then the water level in the washer. Check and see if the hose end is as high as the top of the washer.
I hope this helps you.

Vic

Jul 10, 2009 | Danby DWM99W Top Load Washer

1 Answer

Will not wash, spin or drain out water


Use a plastic container that will fit in the machine and bail the water out into a bucket, only takes a few minutes.
If it has a removable panel at the front take it off and that will expose all the pumpout hose,the pump and the undercarriage of the machine.
You can drain the remaining water from the machine by removing the large rubber pump-out hose from under the plastic bowl, use a bucket to catch the water.
Check under the washing machine for a belt that may have broken or just come off.
hope this helps you

May 23, 2009 | Washing Machines

1 Answer

MAgic Chef top loading washer will not spin or drain


you have to open it,at the bottom of the drum it has a either clear or black plastic hose that goes to pump held together with pressure clips remove them water will flow then ,it also will flood the aerea around it,so plenty of soil to soak it up

Aug 31, 2008 | Magic Chef CAV2000 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Brad Brown

Level 3 Expert

15451 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...