Question about Samsung Televison & Video

1 Answer

HI, I have a Samsung PN60E6500 plasma TV that stopped working. If I switch it on, nothing at all on the screen. Not even a slight blink, nothing. No sound as well. So I opened the back.

The LED on the logic card flashes 4 sec on, 3 sec off. I checked the power supply board. All voltages there is fine, 5V, 15V. All good. When I unplug the paper cable between the logic board to the main Y board, the LED flashes 1 sec on 1 sec off. The Va and Vs comes to the correct level. But Ve and Vsc is still way too low. Ve is about 20v and Vsc -70v. I disconnected the Y driver chip boards, with no change in the voltages. Does this mean the X ans well as Y board is faulty? The specific tv had its plasma screen changed 2 times in its life already, is it maybe the screen again?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 73,691 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Posted on Jan 03, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung TV plasma 60" just quit working while watching it PN60E6500EF it look at the capacitors all are fine any ideas ?


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sep 25, 2015 | Samsung PN60E6500 60-inch 3D Plasma TV

1 Answer

Tv on,red light clicking 5 time,no picture,only sound


Hi Cornel,
No picture only sound, the back lights have failed. Please consult some good TV Tech.

Apr 25, 2015 | Samsung PN60E6500 60-inch 3D Plasma TV

1 Answer

TV TURNS ON BUT NO DISPLAY AT ALL.


do a reset by manually holding down the power button, sometimes that works

Jan 28, 2014 | LG 42PX3RV 42 in. EDTV-Ready Plasma...

1 Answer

Samsung HDTV no picture no sound


These blinks (flashes) are fault indication. By the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be suspected. If you wish to get more details, check the site linked here. It has blinking codes detail to many brand TVs. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

Jan 13, 2014 | Samsung UN22D5000NFXZA 22 In Led Hdtv...

3 Answers

Akai model pdp4249g


Hello drifter,The design of the tv enables the auto search to detect any input signal you have selected. It could be TV (off air, video signals etc) so just switch on whatever inputs to the akai plasma befote you switch the Akai plasma on and let it do the work for you. just relax and watch the tv. recap 1. switch on the input eg video deck, DVD, VCD, or satellite dish. 2. switch on your AKAI PLASMA and 3. wait for the akai to search for your input signals. TRy this simple procedure and if it doesnt work just post back the message. The DON

Jun 15, 2007 | Akai PDP-4249G 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73665 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...